Wallpaper Manufacturers, Custom Wallpaper, Wallpaper Suppliers, China Wallpaper, Wallpaper china, Wallpaper Manufacturers in China, China Wallpaper Manufacturers, Wholesale Wallpaper Suppliers, Cheap Wallpaper Suppliers, Pvc Wallpaper Suppliers.
Website: http://www.wallpaper-manufacturers.com/products/

2. Brush adhesive (1) Brush adhesive operation is not difficult, you can brush the grass roots. Wallpaper can also play in the back. (2) If the wallpaper is thicker, such as plant fiber wallpaper, etc., should be in the back of the paper and the grassroots have to brush adhesive, because the thicker the wallpaper, glue brush too little stick is not strong, a lot of brush and easy flowing, so to double surface gluing. (3) plastic wall paper wallpaper, under normal circumstances, the first adhesive drama in the back of the paper. Thus, since after gluing wallpaper glue can be face to face stack stacked plastic, easy to pick up construction, but will also prevent nausea play the role of water in the water evaporates adhesive, glue brush after.

3. Wallpaper stuffy water. The so-called boring water, refers to the wet paper with water, so that it can be fully scalable, to avoid encounters uneven stretching occurs when the adhesive wall paper. Should stretching unevenness, wrinkling at the surface, affect the wall paper quality. (1) ordinary plastic wall paper wallpaper, water stuffy advance is necessary. Stuffy water Method: wet the back row pen dipped in water (ie, water skiing), it can also be rolled into a spiral-cut wallpaper into a water bucket 5 soak 3 ~ 5min, and then come out to the surface of the water shaking out, then quiet stop 20min

about. (2) If the wall is a wall paper adhesive brush on the base, in the dry wall paper wallpaper suddenly encountered the wet adhesive, due to differences in water levels caused by the phenomenon of wrinkles, so boring wallpaper water is necessary. If the adhesive brush on the back of the paper, in fact, equal to a water brush, because the adhesive is nothing more than a little water and condensed. Therefore, the wall paper of wrinkles will be a lot less than the former, if the person using the adhesive brush, brush again after the gum rubber face to face for a discount store, will be fully telescopic wallpapers through the water.

Therefore, the adhesive brush on the back of the paper, the water can no longer be bored this procedure. 4. Yin and yang angle parts processing (1) In order to prevent the use of the touch, the way a plastic, do not stay patchwork wall paper when the male corner portion. Yang corner regions use more packages in the past method, patchwork Corner in the shade. (2) For the female corner portion, wallpaper seams do not just stay in the shade corner, but the ride into the female angle 1 ~ 2cm. (3) Yin and Yang angle and window sills and other parts easy to accumulate dust, should increase brush adhesive 1 to 2 times, in order to ensure a strong bond. (4) If there is a local curling, debonding, subsidies, can be used a brush dipped in white plastic, which make up in prison. This phenomenon occurred in parts of the sill level, the intersection of the wall and items. 5. A large area of wall paper (1) large area before pasting advised to do a model, depending on the material used and pasting parts of past experiences, unified operating essentials.

(2) On some quality is not easy to solve the problem, the need to make the relevant units to study and solve. The pattern stitching, symmetrical patterns, etc., to find out the cause of material or construction area. 6. Strength Putty (1) repair the wall putty used, have a certain strength, should not be used alone as a main cement carboxymethyl cellulose materials. (2) In the more humid wallpaper on the wall is completed, should open the window during the day, suitably strengthened ventilation, doors and windows closed at night to prevent moist gas intrusion. 7. Other (l) wall paper wallpaper in the case of other types of basic interior finish carried out. If the wall shortly before the wall paper is still plugging holes or holes due to plugging holes mortar is not enough to fully dry, easily lead to uneven surface color. If the holes after pasting, it is wrong, it damaged the finished product, local difficult to repair.