On August 05, 2014, Motorola offers some special discount on Net10 phones. Most of the people now have a Smartphone, and it is very common to use ultra-modern ones currently. Now a day, the young folks are quite tech savvy, and it is not a problem for them to set up a Net10 APN for their ultra-mod phones. However, the aged group is not that accustomed with the ever changing technology of the modern phones. Moreover, it is common for a group of elderly people to have a trendy Smartphone. So, they are facing problem setting up some of these current apps for their phones.
Here, wireless mall understands these problems quite good and they effectively release a guide to set up Net10 APN settings for i Phones. Here are the details:
In the beginning, connect to the Internet through a Wi-Fi connection and then open your desired browser on the phone and go to the specific site providing the app facility.
Click on “create APN,” and pick United States, and Net10 (wap.tracfone) as the carrier. If it fails then try each and every listed Net10 options till you find the desired one. Following this, click “create APN” and then click on “install.” Your browser should open and then you have to restart the phone. Then, cut off the Wi-Fi and open browser and try to load any website on it. If it suits for you, then you your job is done. This is the ideal method for data; however, you may require an extra method for MMS to perform properly.
Set Up MMS APN to your Net10 phones
To set up MMS APN, put in the Carrier APN settings via a SIM interchange method. You will require a T-Mobile SIM card; no problem with an inactive card, and when put it into the phone it should display the Cellular Data Network settings. After that, replace the SIM with your original SIM card (for example NET10 AT&T SIM, go back to Cellular Data Network Settings and put in the Carrier APN settings.)
Go to “settings,” then “general” and finally search for “profile.” Click on it to delete the profile. If there is no profile, then remove the SIM card and click “ok.” Then, replace the other SIM card back in the phone and you will see “no service.” Then go to “settings,” then “general,” then cellular and look for “cellular data network.”
Next, take out the SIM and your settings will return to either “cellular” or “general.” Place the AT&T SIM back into the phone. Cellular should transfer to “on.” Click “cellular data network and delete all of the data there and in the MMS.
Subject to the iOS ; the proper settings are:
iOS 6:
• NAME = not used
• APN = APN (in cellular data)
• MMS_APN = APN (in MMS)
• MMS PROXY and MMS PORT = MMS Proxy (MMS Proxy: MMS PORT)
Following this, switch off the Tracfone Phones, and then again switch it on. Turn off your Wi-Fi connection, go to your browser, and check if it is still working. After this, go to settings, then “messages” and “message off.” Then, go to “messages” and lead to a test MMS picture. If you have been successful then your Net10 APN will start working.

For More Information Visit us at https://wirelessmall.com/