Washing Machines are a common appliance at the home. These are great at cleaning our clothes but who washes the washers. By following some common steps we are going to keep these things smelling great for years. So that you need not visit the whirlpool washing machine service center for common problems and cleaning. No matter what kind of washing machine or washer you have doing load after load day in and day out. Resulting in an excess of soap scrum and that scrum is like a magnet for lint and other things floating around in the wash and that can really start stinking over time.

Steps to Clean a Washing Machine:
Step 1: Cleaning the Gasket
Front-load washing machines are particularly prone because they have this gasket inside a lot of water gets trapped, a lot of scrum and lint. Because the washer uses less water there's less to force that entire scrum out. There is a drain hole right here and you want that to be free of obstruction so that water can drain properly.

Step 2: Cleaning the Filter
To clean the water filter, every front load washer has one it's located on the bottom. You need to open this flap up and you are going to see two parts there. It's important that before you take out this filter you need to grab this tube and then drain extra water and now be ready to remove the filter, take off the screw and pull straight out. This is something you can just walk over to the sink and wash with hot water & soap. If there is a lot of scrum in there you could use a toothbrush. If you can’t perform self-cleaning or if there is any serious issue contact the Samsung washing machine service center for further resolution of the issue.

Step 3: Cleaning the Tub
There are a lot of cleaning agents & combinations of cleaning agents that you can find to clean your washing machine. Here we are going to choose two best cleaning agents like baking soda and vinegar. You need to take a quarter cup of baking soda with an equal amount of water and then pour it into your detergent dispenser. Now just add 2 cups of white vinegar to the inside of the drum and run a cycle on hot. Some machines have a self-cleaning feature so don't forget to check the manual first.

Step 4: Keep the tube dry between washes
Take the wet clothes out and whenever the washer is not running leave the door a little cracked open. Also if you have a high-efficiency machine, be sure to use high-efficiency detergent. Now if you have a top loader washing machine you are probably not going to run into the same odor issues that you would with front loader but if you want to give it a scrub you can follow the same instructions that we provided with how to clean the tube on a front loader.

Conclusion
You just need to clean the washing machine and keep it lint-free. Major Home appliances, particularly like the ACs, fridge, Led TV and washing machine, needed to be handled by the specific technicians and service centers like Samsung LED TV service center and whirlpool refrigerator service center to avoid further damages and to maintain safety. Always call for an expert technician or repair center like repair4care to do repair services and fix your appliances efficiently.