17 July, 2014: The new SanDisk Ultra Plus solid-state drive is an upgrade to the SanDisk Ultra that came out last year. The Plus notation doesn't necessarily mean better performance, but rather lower total cost. The new drive, at launch, is among the most affordable on the market and in fact is more affordable than the SanDisk Ultra. On the inside, the new SanDisk Ultra Plus is also very different from its predecessors. It's the first drive from SanDisk that uses the new Marvell SS889175 controller, which is designed for both SSD and regular SATA standards. The controller supports SATA 3 (6Gbps), and the Ultra Plus is also backward-compatible with SATA 2 (3Gbps) and SATA (1.5Gbps). You'll want to use the drive with a computer that supports SATA 3, however, to get the most out of it.

As for flash memory, the Ultra Plus uses SanDisk's own 19nm eX2 ABL MLC NAND. While this is multiple-layer cell memory, which is popular in consumer-grade SSDs, the Ultra Plus' type of memory is capable of having a small portion work in single-layer cell mode, which is similar to the memory used in enterprise-grade SSDs. This mode is called nCache, and the drive's firmware determines how much of its total capacity is used for this. According to SanDisk, the SLC nCache portion is allotted dynamically and remains less than 1GB.

Use "Undelete" to recover deleted files from SanDisk Ultra Plus SSD hard drive.

Use "Unformat" to recover data after format SanDisk Ultra Plus SSD external hard drive.

Use "Recover partition" to recover files if SanDisk Ultra Plus SSD hard drive partition changed or damaged or deleted.

Use "Full Scan" to recover lost files SanDisk Ultra Plus SSD if partitions show as "raw" or recover files which can not be found with "undelete"and "unformat" and "recover partition", recover files from raw partition, recover files of partitons which are not NTFS, nor exfat, nor fat32.

For Additional Information Visit the Website at: http://sandisk-data-recovery.aidfile.com/