Evacuate THE FRAME AND LAY IT FLAT ON A WORK SURFACE.

Expel the screen in its casing from the entryway and lay it level on a workbench or a lot of sawhorses.

Step by step instructions to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

PRY THE SPLINE OUT OF THE GROOVE ON THE BACK OF THE FRAME.

Utilize little pincers or a woodworker's borer to pry the spline out of the score. In the event that the corners are tight, utilize a screwdriver to evacuate the spline. On the off chance that the spline seems, by all accounts, to be fit as a fiddle, put it aside for use with the new screen.

On the off chance that the spline is fragile or split, you should supplant it with another spline (accessible at tool shops).

Step by step instructions to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

LIFT OUT THE DAMAGED SCREEN.

Holey screens let in creepy crawlies — and bats, if the gap is sufficiently huge.

Step by step instructions to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

WIPE THE SPLINE GROOVE CLEAN.

Make certain that you expel even the most modest coarseness. You can utilize the tip of a screwdriver or bit to get into the depression if important.

Instructions to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

LAY THE NEW ALUMINUM SCREEN OVER THE FRAME.

Make sure that it covers the score by something like 1/8 inch on every one of the four sides.

Step by step instructions to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

CUT THE SCREEN AT A 45-DEGREE ANGLE AT THE CORNERS.

Remove the edges of the screen at a 45-degree point, simply inside the external edge of the spline groove.

The most effective method to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

PRESS THE SCREEN INTO THE GROOVE USING THE CONVEX END OF THE SPLINING ROLLER.

Hold the roller at a 45-degree edge toward within edge of the notch and after that fold descending to press the screen into the section.

Hold the screen tight over the casing as you fold it into place. Droops and wrinkles are about as alluring on screen entryways as they are on individuals.

Step by step instructions to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

PRESS THE SPLINE INTO THE GROOVE USING THE CONCAVE END OF THE ROLLER.

Tip: Don't cut the spline at the corners: Instead, twist the spline around the corners and introduce it in one ceaseless piece. When you position it firmly ready, the spline holds the screen set up.

The most effective method to REPLACE AN ALUMINUM SCREEN ON A SCREEN DOOR

TRIM AWAY EXCESS SCREEN.

Place the tip of the blade between the spline and the outside edge of the spline section and draw the blade gradually along the whole depression border.

For more information please visit www.portkennedysecurity.com.au