K-Star Electric Heater is more economical than heat pumps but they depend entirely on electricity consumption to heat the water. Its operation is simple and can be adapted to all types of filtration systems that have been installed. There are different powers, always related to the ability to heat the water. The smallest and least powerful can be used in portable pools or small pools.

What is electric water pool heater?

Electric Salt Water Pool Heater is the simplest and most economical solution in terms of installation. The electric heaters are placed in the water supply circuit to the pool and startup while the purification is in operation. They have a thermostat (mechanical or digital, depending on the model) that regulates the outlet temperature.

Whenever any new equipment is installed, it implies an important electrical consumption that is why it is essential that you check the protection conditions in the electrical box of your home, in accordance with the installation instructions of the equipment.

The power is measured in kilowatts (kW) and you can find them from 2 to 24 kW. These devices are very small but robust. They can be placed in several positions, on the ground or on a wall and their manufacture is very resistant to oxidation, so they are very durable. Also, they are very silent.

How does it work?

Hayward Aboveground Pool Heater is coupled to the pool circuit, always before the pH or chlorination system. To do this, it has to be adapted to the system by means of pipes, taking the precaution of placing cutting keys to make it independent of the circuit if necessary. You could also have an independent pumping system that would run the water through the heater.

The water temperature can be regulated by an analog thermostat. They are connected to the network through common plugs. It incorporates technology based on vorticity (creation of eddies in the flow of water) that prevents the sedimentation of impurities in the resistances, which lengthens the life of the device.

When you cover the pool with an installation with metal profiles and polycarbonate, it will greatly improve the efficiency of the appliances you use to heat the water. Approximately 94% of the heat loss from a pool is produced by the surface. Hence you would achieve lower or lower losses covering the pool, although this requires a higher investment. But you can also achieve improved energy efficiency by covering the pool with summer blankets to avoid the loss of heat in the water.

If you are in search of Ameristar Two Stage Furnace or any kind of accessories for your swimming pool, visit our site torontopoolsupplies.ca.