The break-in period is the most critical time in the life of your Parsun outboards. Correct operation during the break-in period will prolong the life of your new outboard and will ensure optimum performance. Properly breaking-in your new outboard will ensure the initial smooth operation and lubrication of all moving parts (pistons, gears, bearings, etc).
Do Parsun outboards come with lower unit oil (gear oil) already installed from the factory?
Yes. The lower unit gear oil has already been added at the factory, however, you should check to ensure it is completely full before starting your outboard for the first time. To replace/add lower unit oil we recommend any SAE 80 or 90 weight oil. You may also want to check out our owner’s manual on how to change and check the oil in your lower unit.
Please note: there are not gear oil if the outboards transport by the air.
Why has the break-in procedure for my Parsun outboards?
The break-in period is the most critical time in the life of your Parsun outboards. Correct operation during the break-in period will prolong the life of your new outboard and will ensure optimum performance. Properly breaking-in your new outboard will ensure the initial smooth operation and lubrication of all moving parts (pistons, gears, bearings, etc).
Do Parsun 4-stroke outboards come with crankcase oil already installed from the factory?
NO!!! Parsun 4-stroke outboards are not filled with oil from the factory. Before you start your 4-stroke outboard you must add oil to the crankcase. If you do not add oil, you will severely damage your outboard. Running a 4-stroke without crankcase oil would be like running your car without oil…the engine will seize up and you will end up having to replace the engine block/powerhead (this type of damage is not covered under warranty). Please consult your owner’s manual for the proper oil type and amount to add and for the proper break-in and operating procedures.
What is the length of cable for Parsun Outboards?
There are two kinds of cables for remote outboards. One is the cable for controller; the other is the cable for steering wheel (Please note: there are 2pcs cables for controller, one is for throttle and the other is for gearshift). We normally provide 14’’ cables if you don’t have special request. But we can also provide different lengths of 12’’, 14’’, 16’’ and 20’’ for your option.
Please refer to the following drawings of cables:
Push in the choke knob after the engine started.
The cable for steering wheel
For more details on our products and services, please feel free to visit us at 15 hp outboard, 20 hp outboard, 25 hp outboard, online outboards, small boat motor