1, the robot
The station with cooling station removes the board from the side, effectively increasing the cooling of the Pet Bottle Preform. The use of linear guides not only ensures the movement of the robot, but also provides a convenient maintenance space. Modular built-in preform conveyor belt design makes maintenance easier.

The Siemens servo control system used can be effectively integrated with the PLC control of the entire system, which makes the system more stable and more convenient to operate. The 96-cavity robot uses a dual-drive, dual-rail design that significantly increases load carrying capacity and speed of movement, helping to shorten the molding cycle.

2. Advanced control system
Through cooperation with the production process of PET preforms, the system can not only achieve closed-loop control of injection speed and holding pressure, but also adopt management modes with different levels and different management rights, ensuring that all advanced settings must be It can be accessed by administrative authority, which effectively controls the quality of the product. Management and operation are made easier by integrating the drying system with the control system of the injection molding machine.

3. Unique hydraulic control system
The hydraulic system uses the variable pump control technology and accumulator method of *. The perfect combination of variable pump and accumulator makes control more stable, easy and fast, and is more energy efficient. The entire hydraulic system uses original components from Germany, high-performance pumps and valve units to make the entire hydraulic system more stable and stable. In addition, in hydraulic design, a company follows all the principles of valve parts and oil slabs as close as possible to the operating components such as cylinders, making control faster and *.

4. Connection between the bottle preform machine and the bottle blowing machine: When connecting the bottle preform machine and the bottle blowing machine, the following items should also be noted:
Before the connection, the preform must be cooled to room temperature, and the temperature of the inner and outer walls is the same.
The connection should minimize the drop point and avoid defects such as bruises and scratches on the preform.
Try to avoid corners and collisions.
Add a cooling device such as a fan. If possible, * use a conveyor belt with a breathable function.
There must be sufficient delivery length to allow the preform to get enough cooling. Generally, the lightweight preform has a wall thickness close to 2.0 mm, which is cooled faster than a normal preform, so the theoretical conveying distance should not exceed 30 m.
The speed of the conveyor line should be moderate, so that the preforms should not be stacked or too fast.
The ambient temperature should be appropriate. If the ambient temperature is too high, consider providing a blower to supply cold air.
Considering that the subsequent equipment may be shut down, it is also necessary to add a set of embryo device, so that the preform can be directly attached to the embryo while being transported to the conveyor belt.

Jilian mold has rich experience in pet product design and production, we can provide professional services to customers. Maybe you are worrying about a 5-Gallon Pet Preform, so don't miss out on our brand, we will provide you with a one-stop solution.