3rd Nov, 2015 –England - My Toilet Spares, one of the most dependable and leadingstockiest of toilet seats and bath spare parts in England, offering a variety of toilet seats and related accessories to meet the demand of modern home owners. Their toilet Seats and supplies are equipped with great functionality that would help maintain comfort, hygiene and convenience in your bathroom. They also have the most productive push button toilet flush shop in England offering great comfort and convenience to the users and a one stop shop for all toilet products.

“We have seen more and more people customers facing several issues with their toilet, especially “a weak or incomplete flush”. So, as a responsible toilet Spares retailer we have decided to make our customers aware by giving them some useful advice on how to resolve several flush related issues” says the director general of My Toilet Spares.

“A low or very Stiff flushing push button can be caused by, low water level in the tank/Cistern, the flapper shutting down too quickly, a block in the corner, vent pipe or sewer pipe. Accumulation of Lime Scale in the inlet valve can also cause an improper or weak flush” says the head of My Toilet Spares Technical Team.

Low water in the tank – check out the water level and fine tune your float higher to improve water level.

Flapper shuts down too quickly – check out the length of the chain. Chain slack for most of the toilets must have ¼ t - ½ inch of slack, regulate if required.

To identify if you’ve a block in the trap way, vent pipe or sewer pipe:

Fill a container with 1 or more gallons of water and hurriedly discharge into the basin. If the basin flushes usually then there’s no obstruction down the trap, vent pipe or sewer pipe that’s having an effect on regular flushing. If it whirls but doesn’t flush or has a fragile flush, then the block is inside the trap, vent pipe or drain pipe. Try a nozzle to wash the toilet first. If this’s ineffective, then employ a toilet auger.

Clean the basin to enhance flush:

• Use a screwdriver to ream out the starter hole and rim holes of the basin of Lime Scale and mineral build up.

• Empty the tank and fasten flapper open

• Pour down 1 cup of Lime-Away Toilet Bowl Cleaner into the flush valve hole. Let it settle for at least 1 hour.

• After one hour, discharge another cup of 1/2 Lime-Away and 1/2 water into the valve hole. Shut down the flapper instantly and activate water supply. Flush your toilet, two or three times to wash and check.

“These tips are very effective and you should give them a try if you had weak or incomplete flush” he said.

About the Company:-

My Toilet Spares (www.mytoiletspares.co.uk) is a well-known stockiest dealing in all genuine toilet seats and bathroom spare parts in England. It assures to deliver the highest quality of toilet seats and bathroom accessories all over England.