Electric Actuated Ball Valve Manufacturer in USA also comes with a variety of enclosure styles from low-cost and lightweight to heavy-duty and explosion-proof. The electric actuated ball valve is two types that have a simple solution for many basic on/off applications. They rotate 90 degrees from fully open or fully closed. It is operated more slowly than valves with air operated pneumatic actuator.

These products use an electric motor to operate the ball valve and control the flow of media. The components of an electric actuated ball valve are:
• Electric: refers to the use of voltage to power the actuator.
• Actuator: is used to automate control of the ball valve and this uses voltage to power the valve on/off.
• Ball Valve: a quarter-turn on/off valve that check the flow of liquid or gas media via a pivoting ball.

The electric motor generates a torque which is transmitted by a shaft that connects to the valve stem. This rotates the ball valve and to achieve the required torque a system of gears is connected to the electric motor shaft. The torque capacity is an important identification for selecting an actuator. It must be higher than the required torque to turn the ball valve by a certain percentage that is often specified by the ball valve manufacturer.
The speed of operation of an electric actuator is inversely proportional to the torque of the actuator. The gear system defines the connection between speed and torque. A higher gear ratio would result in more torque but a lower response time.

Advantages of the electric actuated ball valve:

• Easy to operate
• Low cost of operation
• Minimal Noise
• Flexible motion control
• Slower cycle time

Application of electric actuated ball valve:

• Irrigation Industry
• Water Treatment Equipment
• Heat exchanger
• Vehicle wash systems

Being a valuable Electric Actuated Ball Valve Manufacturer in USA it has following features-

Materials: CF8M, CF8, SS316, CF3M, WCB, and Stainless steel (SS304, SS316, CF8M, SS316L, SS904L).
Class: 150 to 2500
Size: 1/2" to 80"
Pressure: PN6- PN450
End Connections: Flanged, Socket weld, Butt weld, Threaded, Wafer, Lug
Operation: Electric Actuator

Visit our website for more information-
https://svrglobal.net/products/electric-actuated-ball-valve/