According to the style, identify the style and the position of the cutting line on the human table with the color marking line; pave the basic pattern on the human table and determine the pattern of the garment; cut out the pieces of the basic sample and dress on the human table according to the pattern. Determine the position of the pleats, and select the fabric used to make the pleats according to the size and direction of the pleats. The length of the fabric is greater than the length of the pleats; stitch a line 1cm from the edges of the fabric (in the direction of the pleats) Traces and traces are adjusted to draw out one of the upper or lower threads to form a pleated pleat. The length of the pleated pleats after the completion is the same as the length of the dress style design requirements, leaving 4 cm at the head and tail, and the four ends of the extracted sewing thread. Keep all, without cutting off, affix the four-end sewing thread to the cloth board, arrange the irregular fabrics after the pleats to make a pleated arrangement, and fix them at the left and right ends with a pin; The fabric is laid on the basic model fabrics on the human table, and the folds are adjusted on the human table to make it flat. Remove the adjusted pleat fabric, sew a sewing thread at both ends of the pleated fabric, and fix it. This method uses planar structure design for dress production. It uses a more reasonable basic model to modify the model according to the specific style requirements. It adopts shaping outside the table on folds, and then finely adjusts it to reduce direct on the human table. Shaping the difficulty, improve the correct rate. This method is more suitable for small batch production of custom dresses in factories.

Read more at:bridesmaid dresses online
| wedding gowns melbourne