The building elevator plays an important role as a means of transporting passengers. In the early stages of designing a building, traffic flow analysis and modeling is required based on these data to select the type, quantity, capacity, speed, service system, and location of the elevator. The existing elevator type even meets the designer's most complex ideas. Modern technology allows the installation of elevators in very narrow spaces.

Therefore, the choice of building elevator type is quite simple, because it depends on the actual electricity consumption of the expected building. If you only want to move in the vertical load, then you will need a freight elevator. If the goods need to move horizontally - you need a transport tool. Patients who want to lift are hospital elevators.

The quality of the service building affected by the number of elevators installed depends on the type of building, the number of users in the building area, and the location of the restaurant. For example: in some manufacturers of the office recommended elevator from 150 to 300 users. In the hotel - 100-200 per 1 elevator. In the hotel, it is best to plan and repair the elevator, the number should be two-thirds of the total number of elevators. In the residential floor, if the floor more than 6 layers can be installed passenger lift.

The lift effect when the passenger arrives at the desired floor. Hope that the movement from the lower to the upper should not exceed 30 seconds. If the number of floors of the building is low and the passenger is small, the standard building elevator must be ordered - 1 meter per second. It is advisable to book an elevator at a speed of 1.5 m / s with more than 9 floors or an increase in passenger traffic. For 30-storey houses, we can safely purchase elevators up to 7 meters. You can search http://www.dazenelevator.com on google to find us.