EDM 350
1. EGT - Exhaust gas temp.
2. CHT - Cylinder head temp - probes and harness incl.
3. VDC - Voltage display.
4. CLD - Shock cooling.
5. ROP/LOP - Lean finder.
6. DIFF - Engine health.
7. USB Port
8. Internal Memory - Enough memory to record 600 hours of data (recorded every 6 seconds).
9. EZTrends Software - Graphics software with Google Earth location included.
10. RPM - Prop rotation speed.
11. MAP
12. O.T. - Engine oil temp.
13. O.P. - Engine oil pressure.
14. F.P. - Fuel pressure.
15. OAT - Outside air temp.
16. TIT - Turbine inlet temp.
17. CRB - Carburettor temp.
18. CDT - Compressor discharge temp.
19. AMP - Battery load output
20. L-R-Main - Fuel quantity
21. V-2 - Second volts readout.
22. Amp-2 - Second load
23. % HP - With FF, OAT and RPM.
24. FF - Fuel flow includes:
• GPH - Gallons per hour.
• REQ - Fuel required to way point / destination.
• USD - Fuel used.
• H:M - Endurance in hours and minutes.
• MPG - Miles per gallon
EDM 700
1. Hands-free, automatic scanning
2. Front panel programming
3. 1st and last cylinder LeanFind with true peak detect.
4. Displays both leaned temperatures below peak and peak.
5. Battery voltage with alarm.
6. 24 Programmable alarm limits.
7. Normalize view.
8. DIF low to high EGT with alarm.
9. EGTs to stable 1°F resolution.
10. Shock cooling monitored on every cylinder.
11. User selectable index rate.
12. Fast response probes.
13. Non-volatile long-term memory.
14. Records and stores data up to 30 hours.
15. Post-flight data retrieval.
16. Data retrieval software.
17. Alarm and warning light panel.
18. Oil Temperature.
19. Oil Pressure.
20. Turbine inlet temperature.
21. Outside Air Temperature Probe.
22. Compressor discharge temperature.
23. Carburettor temperature.
24. Fuel Flow FF.
25. Solid-state rotor fuel flow transducer FF.
26. Fuel quantity in gallons, kilograms, litres, or pounds.
27. Low fuel quantity alarm.
28. Low fuel time alarm.
29. GPS interface.
30. Instantaneous fuel flow rate.
31. Total amount of fuel consumed.
32. Total fuel remaining.
33. Time to empty at the current fuel flow rate.
34. Displays % horsepower and RPM
For more information, please visit: https://www.jpinstruments.com/shop/edm-350/ or https://www.jpinstruments.com/shop/edm-700/