iWave Systems, a leading embedded products & services company, launched the Arria 10 SoC FPGA System On Module. iWave’s Arria 10 SoC FPGA System on Module is based on the ARM-based Arria 10 SX family device with F34 package. The module is equipped with 32-bit DDR4 memory support for HPS with optional ECC and 64-bit DDR4 support for FPGA. All the IOs and high speed transceiver blocks will be available on the SOM board to board connector.
Arria 10 SOC designed to meet the performance, power, and cost requirements of applications such as Test and measurement equipment, Control, and intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment and Broadcast and distribution equipment.
With compact 95mm x 75mm form factor, the Arria 10 SoC System on Module (SOM) supports 1GB DDR4 with optional ECC for HPS and 1GB SLC NAND Flash for HPS. The module is supported with 40°C to +85°C Industrial operating temperature and enabled with Linux 4.1.22 BSP support.
Arria 10 SOC FPGA System On Module (SOM) Highlights:
• Arria10 SX SOC & GX FPGA compatibility
o SX270, SX320, SX480, SX570, SX660
o GX270, GX320, GX480, GX570, GX660
• 24 high speed transceivers @ 17.4Gbps
• Up to 76LVDS/152SE FPGA IOs
• 64-Bit DDR4 support for FPGA
• Variable IO voltage support
• Industrial Grade operation
The specifications of Arria 10 SOC FPGA System On Module (SOM) are given below:
• SoC: Arria10 SoC
o Dual Core, ARM Cortex - A9 CPU @ 1.5GHz
o SX270 (10AS027) FPGA Fabric
o 35mm x 35mm F34 Package
• Memory:
o 1GB DDR4 with optional ECC for HPS
o 1GB SLC NAND Flash for HPS
o Optional 64-bit DDR4 for FPGA*
o QSPI Flash for FPGA (Optional)
• Communication:
o 10/100/100 Ethernet PHY For HPS
o USB2.0 transceiver for HPS UTMI
• 240 Pin Board to Board Connector:
• Arria10 SoC HPS IO interfaces:
o Gigabit Ethernet x 1 Port
o USB 2.0 OTG x 1 Port
o SD (4bit) x 1 Port
o SPI x 1 Port, I2C x 1 Port
o Full Function UART x 1 Port
o Console UART, GPIOs – 4 Nos
• Arria10 SoC FPGA IO interfaces:
o 24 high-speed transceivers
o 76LVDS/152SE FPGA IOs
o 8LVDS/8SE General purpose clock outputs
o 7LVDS/7SE General purpose clock inputs
• Headers:
o HPS/FPGA JTAG, FPGA AS headers
• Power Supply:
o 5V through SOM B2B connectors
• Temperature support:
o -40°C to +85°C Industrial
• OS Support:
o Linux 4.1.22
• Form Factor:
o 95mm x 75mm
Note *: 64-bit FPGA DDR4 support available only for SX480/GX480 or higher devices
Evaluate the kit: FPGA Development Kit
More info: FPGA SOM Module
Equipped with vast in-house expertise, iWave also provides comprehensive hardware, FPGA and software engineering design services for customization of modules. For further information or enquiries please write [email protected] or contact our Regional Partners.