If you're running a Fadal VMC15, VH65, or TR65 and dealing with frustrating amplifier failures, unexpected shutdowns, or servo performance issues, the ITS DC Brush Amplifier (AMP-0006-ITS) is designed to solve these problems while delivering superior performance and protection. This isn't just another replacement part—it's an engineered upgrade that addresses the weaknesses of standard amplifiers.

Why Standard Amplifiers Fail (And How the ITS AMP-0006-ITS Fixes It)

1. Motor Shorts & Overcurrent Damage

Problem: Traditional amplifiers lack proper short-circuit protection. If your motor or wiring shorts, it can fry the amplifier’s output transistors or even melt circuit board traces—costing you hundreds in repairs and downtime.
ITS Solution:
Built-in short-circuit protection automatically cuts power if a short is detected, preventing catastrophic failure.

We have integrate Current & temperature sensors monitor conditions in real time, folding back power before damage occurs.

2. Confusing Fault Indicators

Problem: Most amplifiers just light up a "FAULT" LED when something goes wrong—but they don’t tell you why. Was it an overload? A short? A bad motor? You’re left guessing.
ITS Solution:
Smart fault diagnostics with a 3-stage warning system:
Stage 1 (Peak Load): LED blinks when exceeding continuous current (but still within safe peak limits).
Stage 2 (Recovery): LED turns off once back to normal operation.
Stage 3 (Critical Fault): LED stays lit + fault signal triggers if there’s a real failure (like a dead short).
No more guessing—you’ll know if it’s just a heavy cut or a real problem.

Hey, do you know about the Essential Guide to the Fadal Dual Arm Tool Changer (DATC, 1330-1D, PCB-0317)?
Read Here: https://itscncfadalparts.blogspot.com/2025/04/guide-fadal-dual-arm-tool-changer-datc-1330-1d-24-tool.html
If you are not, we have mentioned everything that you should know as a CNC operator or owner. Please read and ask anything if you still want to know something.

3. Slow or Inconsistent Servo Response
Problem: Weak servo stiffness and slow response can cause positioning errors, especially during high-speed machining.
ITS Solution:
2x faster servo response improves motion accuracy.
Zero-speed stiffness is doubled, reducing backlash effects for tighter tolerances.

4. Contamination from Metal Chips & Debris

Problem: Many amplifiers have exposed PCBs, making them vulnerable to conductive metal chips that can short circuits.
ITS Solution:
Protective metal cover shields critical electronics from chips and accidental damage during handling.

Key Specifications & Compatibility

Model: AMP-0006-ITS
Output: 20A continuous, 40A peak (ideal for demanding cuts)
Compatible With:
Fadal VMC15, VH65, TR65 (XYZAB axes)
Replaces: AMC AMP-0014 & Glentek AMP-0006
Works with motors: MTR-0002, MTR-0003, MTR-0125

Why Choose ITS Over Other Amplifiers?

✅ Engineered for Reliability – Not just a generic replacement, but an upgraded design based on real-world failure analysis.
✅ Better Diagnostics – Clear fault indicators reduce troubleshooting time.
✅ Longer Lifespan – Protection features prevent common failure modes.

✅ Full Support Included – ITS provides:

Free pre-purchase diagnostics (to confirm you need an amp vs. other issues).
Step-by-step installation guide (no confusing schematics).
Preventative maintenance tips to extend amplifier life.
Direct engineering support (they work with Glentek/AMC engineers).
✅ 1-Year Warranty – Backed by a real commitment, not just a piece of paper.

Who Should Buy This Amplifier?

✔ Fadal owners experiencing:
Random amplifier faults
Burned-out boards from motor shorts
Poor servo performance during cuts
✔ Shops tired of replacing amplifiers every few years.
✔ Machinists who want better diagnostics and fewer surprises.

Final Verdict: Is the ITS AMP-0006-ITS Worth It?

If you’ve ever been frustrated by:

Unexpected amp failures ruining production schedules
Spending hours troubleshooting vague fault codes
Replacing the same amplifier multiple times

…then this is a smart investment. The added protection, diagnostics, and support mean fewer failures, less downtime, and long-term savings.

🔧 Need help determining if this is the right fix for your machine? ITS offers free diagnostic assistance—contact them before buying!