Bearing fault detection analysis


Posted August 28, 2014 by iothjnfdb

Bearing operation failure, so often, so there is no problem. Waste processing is very important.

 
Bearing operation failure, so often, so there is no problem. Waste processing is very important.
1, the bearing temperature rise: yes, you can use the heating installation bearing, joint body organs normal temperature, stroke feeling, he is exactly the opposite bearing temperature is too high.
Low temperature SKF Bearing Introduction http://www.ghk-bearings.com/ lubricating oil quality does not conform to the requirements, too lubricating oil viscosity and metamorphism; Machine installation button (gap. Bearing ring and shaft assembly; about former shell, bearing load, maintain elements such as rolling machine and weight.
2, bearing noise: bearing in the launch of a work permit, voice more light, sound, or fish normal noise and rap, bearing problems.
Bearing noise is more complex, the reason 1) bearing (9), cooperate with the surface of the outer ring wear. It's a little bit wear and damage of the bearing and the bearing get partnership things need to call in high-speed motion. When the bearing fatigue flake metal surface, increase the bearing clearance, voice. 2) and Seoul education enough or dry friction and lubrication bearings in a broken voice. 3) bearing wear loose open, after the plane damage, therefore, the bearing work get hurt. Check the bearing, roller bearing damage to specific conditions and the disintegration of the bearing failure.
3, road surface metal bearing roller peeling: bear all internal and external ring and pavement regularly Sir, so through the contact pressure change cycle. Stress is the cycle count standard, once the body fatigue and skating on the road. Bearing load is too large, method, pressure is also growing. In addition, in ball bearings and the shaft bent shaft hanging corruption, dear flaking off. Bearing and shaft fatigue has been shedding reduce variation in the institutions and working precision.
4, bearing, bearing and theme: burn him get out of the way, full swing state of emergency. Explain burns general lubrication, so the lubricating oil is not in conformity with the quality requirements and metamorphism, and then assembled bearing components in a good mood.
5, the plastic deformation and bearing: gold contact surface earth reprint. This suggests that plastic deformation. Bearing, bearing should be developed is probably due to the huge impact load is applied, shizuoka, local stress yield more if not appear this kind of happened in the low-speed rotation bearing.
6, pillow, cushion: ring area crack reason, diarrhea, foreigners and bearing with Seoul area suite installed bearing, bearing deformation bad surface treatment.
7, with computer and its reason, lubrication. Therefore, the mobile ring roller elements.
8, have to maintain maximum action of automobile metal rolling rolling oil body trapped under-utilization.
May 9, severe wear dear coup in limit position: foreign body, oil and the oil is insufficient, it is not a number ".
Bearing after the installation is complete, should be set correctly, check whether the confirmation to start the mini spin rotation was very successful. Check project: foreign bodies and injury or discomfort, should launch configuration foundation is bad, bad, and every Chinese rotating torque, torque friction seal installation error to university. As power unusually formal walk.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By uikr5t
Website SKF Bearing Introduction
Country Hong Kong SAR
Categories Business
Last Updated August 28, 2014