Could very well be concerned about ordering thousands of flyers from a flyer printing supplier just in case they come back with an error. This is understandable and there is some common mistakes that people make when ordering flyers that might result in a poor result. It's not necessarily the fault of the exact flyer printing company if your flyers come back wrong, which means that make sure you check your flyer designs thoroughly before you "go so that you can print" and avoid these 3 common flyer printing goof ups.

1 . Not enough bleed.

Not having enough bleed around the benefit of your design can have terrible outcomes for your flyer creating job. Your flyers need to look professional and by a professional printed in order to attract customers so having unprinted tips, misalignment and text cut off can be very distressing for a industry ordering flyer printing. These types of errors are not typically the because of the flyer printing company and can be easily avoided ahead of time. Make sure your flyer design has at least 3mm of lose blood space around it before you send it off that they are printed. This means continuing the design for an extra 3mm with very little text or imagery you need in that small 3mm edge. This will mean the flyer printing company can easily together with safely print your flyer designs without the risk of the design and style not meeting the edge of the paper or text remaining cut off. Some printers have different bleed measurements so if you happen to be unsure check with your flyer printing company beforehand what bleed you will need.

2 . Wrong fonts printed.

If you are using tom or special font you have bought for the job (or even obtained free from a legal source) the chances are the fact that the printing company does not have the font themselves. They will open open the document and see the font in a nearest counterpart or the default font setting and will subsequently print design and style off with this font. To avoid this problem make sure you embed the very fonts you use for your flyer design in the documents one send. To be safe, make sure you do this for all the fonts you use, perhaps even common ones. That way the font will be included in the keep track of and they will be able to print off the design exactly as you preferred it.

3. The black is not black enough.

Repeatedly this is a common printing mistake that many people will blame the main printing company for. Luckily enough, this problem can be readily fixed before the design is even sent off to printing company. When creating your design, the likelihood is that any specific black colouring in the design has merely been constructed with the black colour from your swatch palette. Printing this unique black will result in a cool, dull and grayish type of dark colored. This type of black will look similar to the plastic of a black Television set, the black plastic of a laptop or the black cosmetic parts of a printer itself. To get a rich warm and young-looking black you will need to add additional colours to your black that include magenta. Talk to the flyer printing company about the top levels of colour needed in your black and they will be able to recommend you about their particular printer capabilities and the recommended colour stages for a good dark warm black colour.