how to care for oil absorbent pads?


Posted July 14, 2022 by hopetopway

what is the comparison between oil absorbent pads and general adsorbent?  there are several reasons for equipment oil absorbent pads  places where the oil absorbent pads is applicable.

 
The oil absorbing pads is made of polypropylene; Oil absorption multiple machine oil ≥ 12 times; Immersion speed: less than 20 seconds; Environmental protection, non-toxic and pollution-free: the residual ash from post-treatment incineration is less than 0.02%; Take 100mm*100mm samples at the temperature of 68.8 ℃ and 40.1% to test: the oil absorption speed is less than 30 seconds, and the oil absorption multiple is more than 12 times; The longitudinal tear resistance is 43.9n, and the transverse tear resistance is 37.5n; The longitudinal elongation is 23.1%, and the transverse elongation is 9.1%. Standard type: the adsorption capacity is 10~20 times of self weight, which is suitable for all kinds of oil leakage liquids. So how to choose a good oil absorb pads? There are several methods below. The method is as follows.

Here is the contene list:

what is the comparison between oil absorbent pads and general adsorbent?

there are several reasons for equipment oil absorbent pads

places where the oil absorbent pads is applicable.

6吸油片 (5)



There are several reasons for equipment oil absorbent pads?
1. The pipeline leaks oil. The hydraulic system is the blood circulation of the mechanical system. Hydraulic pipes (steel pipes, copper pipes, rubber pipes, nylon pipes and plastics



Tube) can be called mechanical blood vessel. Because the hose is easy to install, it can ensure the relative movement between connectors, and absorb the impact and vibration caused by the flow of fluid in the pipeline, so the hose has been widely used in the hydraulic system of construction machinery. It is an important part of the hydraulic system of road rollers, excavators, loaders and other construction machinery. During work, due to pipe burst, pipe crack and pipe joint



Leakage and leakage of hydraulic pipeline caused by loosening and oil leakage, improper selection of pipe body, improper installation and other reasons are common.







2. Unreasonable design. It is usually manifested in: (1) it is the selected sealing structure, which is incompatible with the working pressure, working temperature, medium characteristics and environmental conditions; (2) It does not pay attention to anti-corrosion, anti vibration, pressure equalization, dredging and other measures, but only one-sided consideration of plugging, such as ventilation, oil return, liquid guide devices and so on are not considered in the design.







3. The manufacturing accuracy and surface roughness of the equipment are not good. For example, gear pumps and hydraulic valves control the leakage with clearance. If the manufacturing accuracy does not meet the design requirements, it will increase the internal leakage, reduce the oil delivery efficiency or affect the accuracy of action.







4. Improper selection of sealing elements and materials often leads to short service life and poor sealing performance of the sealing device, resulting in easy leakage of the equipment.







5. The quality of equipment installation is poor.



6. Improper operation and poor maintenance are the direct causes of equipment leakage, such as excessive oil filling, blocked vent holes, and the packing gland is not compressed



If there is micro leakage at the joint, it is not handled in time, the sealing elements are damaged and not replaced in time, the blanket ring for sealing is replaced without soaking and drying, the invalid packing and gasket are not replaced in time, and people are not familiar with it, so they do not know how to use all kinds of seals and seals correctly.

What is the comparison between oil absorbent pads and general adsorbents?


Adsorbent is the key to deal with the leakage of oil and chemicals. Adsorbents used for oil chemical leakage treatment are usually divided into three types



Class 1: inorganic adsorbents, such as granular soil, sand, silica, vermiculite, calcium silicate, silica gel, active



Alumina, molecular sieve, natural clay, etc. The second is organic adsorbents, such as chaff, sawdust, cotton, rags, straw



Corncob fragments, coarse bran, wheat germ powder, degreased corn germ powder, grains with strong water absorption, etc. Type III polypropylene suction



Attached cotton, oil absorbent cotton or chemical absorbent cotton. Compared with oil absorbent cotton:



Low absorption rate: 1-2 times absorption.



Low absorption rate: it takes several hours, and cleaning requires a lot of manpower.



Absorption selectivity: good for oil absorption, but poor for paint absorption.



The oil absorber pads is made of polypropylene fiber material. Comparison with adsorbent:



High absorption rate: absorb 20~25 times of its own weight.



Fast absorption: calculated in minutes.



Low adsorption selectivity: it has a good adsorption effect on oil, organic solvents, hydrocarbons, vegetable oil and other liquids. The cleaning cost is low, saving money and time.



The oil absorbent pads is suitable for cleaning, containment and prevention of any possible oil and chemical leakage areas, including manufacturing



Transportation industry, petrochemical industry, maritime emergency rescue, port, aviation, public security and fire protection, medical industry, energy and power industry, environmental protection bureau, military, food processing industry, etc Except for places with liquid leakage.



Where the oil absorbent pads is applicable?


The oil absorb pads is suitable for industrial manufacturing and used in all places where liquid leakage or oil and chemicals storage and distribution may occur, including the storage area, around machines and pipelines, near oil tanks and equipment, under trains and trucks, near valves, under aircraft, workbench, etc.



Oil absorbers are suitable for automobile, aircraft and train manufacturers, plastic factories, injection molding factories, mold factories



Steel mills, mines, machinery plants, metal processing plants, oil r efineries, oil companies, shipbuilding



Factories, chemical plants, food processing plants, paper mills, optical fiber factories, cable factories, oil / Chemicals



Storage companies, refineries, oil depots, environmental cleaning companies, leakage prevention contractors, fire prevention



Department, energy power plant.



The oil absorber pads is applicable to maritime oil spill emergency rescue, port terminals, coastal defense, shipping ships Fire prevention department, environmental cleaning company, emergency center, laboratory, school, hospital, diseasControl center, power supply department, military organization, municipal water treatment plant, public transportation, automobile Repair, hospitals and other medical institutions, environmental protection bureau, aviation, public security and fire control.



Other service industries public and private service industries are also the main users of oil absorbers, including power supply departments, industrial and military institutions, municipal water treatment plants, public transport, airport and airline service institutions, and automobile repair. Liquid leakage or overflow in industrial production can cause safety glue, etc., which will cause equipment leakage.



Contact Us
Suzhou Hopetopway New Material Co., Ltd. has been engaged in safetyprot products for many years. Hopetopway has a strong R&D team. Hopetopway also has modern factories with multiple production lines. And a large number of meticulous quality control personnel. Provide global customers with high-quality safetyprot products. Our goal is: Safetyprot Is Hopetopway.

●Contact: Roy Yu

●Mobile number: 086 159 0068 2043

●Tel: 86 0512 6679 1900

●Email: [email protected]

●Website: https://www.nonwoven86.com/

-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By roy.yu
Phone 086 159 0068 2043
Country China
Categories Opinion , Podcasting
Tags oil absorb pads , oil absorbent pads , oil absorber pads , oil absorbing pads , oil sorbent pads
Last Updated July 14, 2022