Engine oil leakage is one of the common faults. It is not necessary to be too alarmed, but it is necessary to understand several conventional problems of engine oil leakage. Here are the reasons for engine oil leakage and repair methods: 1. The car with a long time of about 5 years is relatively high, and the gasket of the air chamber needs to be replaced. 2. Oil leakage at engine timing cover. Remove the engine timing cover and reglue it. 3. Oil sump drain screw is loose or damaged. Tighten or replace the drain screw. 4, drain screw gasket does not change for a long time. Oil discharge screw gasket plays a certain sealing role, this gasket had better be replaced regularly according to the maintenance cycle. 5, oil filter oil leakage. Such as the installation of the oil filter is too loose or too tight, or the use of inferior oil filter, can only be replaced with a new oil filter. 6. Engine oil pan leaks oil. The oil pan gasket is damaged. It is necessary to remove the oil pan, replace the oil pan gasket and reglue it. 7. Crankshaft oil seal leaks oil. Replace crankshaft oil seal, this operation is more troublesome, need to dismantle a lot of things, the cost of working is also higher. If the leakage is not serious (such as oil seepage) can choose not to repair, but must deal with the oil leakage. Oil-absorbing pad is made of lipophilic superfine fiber nonwoven fabric, without chemical agents, will never cause secondary public hazards, can rapidly absorb its weight dozens of times the oil, organic solvents, hydrocarbons, vegetable oil and other liquids.

Here is the contene list:

● What are the types of oil-absorbing pad

● What kind of oil does oil-absorbing pad absorb

● Oil absorption pad industrial cleaning knowledge

What are the types of oil-absorbing pad?

1. Generally speaking, oil absorbent pad products can be divided into five categories:

2. The first type is oil absorption sheet, when the leaking area is relatively small, we will use this oil absorption mat to absorb oil, as long as it is directly placed on the surface of the oil.

3. The second type is oil absorbent boom, when the leaking area is relatively large and the amount of oil is quite large, we can use this kind of oil absorption mats will get the scope to the minimum, and finally achieve the purpose of cleaning all the leakage.

4. The third kind is oil absorbent rool, when the building internal leakage, we can directly put this kind of product spread on the ground to clean up the oil leakage.

5. The fourth kind is oil absorption pillow, this kind of product can be used alone namely, also can be used with oil absorption strips.

6. The fifth type is PVC boom, which can be used when we need to delineate a large area of oil spill in the sea.

What kind of oil does oil-absorbing pad absorb?

Oil absorbent mats can control and absorb petroleum hydrocarbons, all kinds of acid (including hydrofluoric acid), alkaline dangerous chemicals, non-corrosive liquids and large-scale oil spill accidents at sea. Oil absorbent pad is the most commonly used item to deal with spills after spills of oil products and chemicals.

Oil absorption pad industrial cleaning knowledge.

● Oil absorption pad has the characteristics of oil absorption, its oil absorption is ten to twenty-five times its own weight.

● Oil absorption pad adsorption speed is very fast, even in minutes to calculate.

● Oil-absorbing pad is buoyant and can be widely used in industrial manufacturing and Marine operations.

● Oil-absorbing pad can be used again, so it can save a certain amount of money for the company.

● Oil absorbent mat is resistant to chemicals, so it is difficult to react with other chemical supplies.

● Oil-absorbing mat will not rot, not moldy, at the same time in use is quite safe, and will not produce pollution to the environment.

● Oil absorption pad after combustion, leaving relatively little residue, reduce the pollution to the environment.

● The cost of oil absorption pad is very low, but its adsorption capacity is quite high.