The cargo elevator system comprises a fixed freight elevator and a non-scissor freight elevator. It is appropriate for moving items between the second and third levels of commercial buildings, dining establishments, and restaurants. Particularly suitable for industrial environments where trenches cannot be dug. And there is no need for an upper lifting point—various forms (single, double, four columns). With hydraulic and electrical precautions, the machinery operates without a hitch, transporting the cargo affordably and practically.

In narrow spaces, it can be challenging to find solutions for three-dimensional garages, underground garages between two and three-story high-rise buildings, situations where pits cannot be excavated, situations where the top height cannot meet requirements, etc. Cargo elevator lift systems are primarily used to transport goods between various working floors. Casting Machinery will create an extremely effective distribution platform for you. The product's hydraulic system has anti-falling features, interactive interlocking of the upper and lower doors, and operation buttons that may be placed on the lifting platform's work surface and each floor to accomplish multi-point control.

The well-built device has a sizable carrying capacity and stable lifting and is easy to install and maintain. The low-floor cargo elevator is a cost-effective and valuable alternative to the perfect cargo-transporting machinery. Choose from various potential configurations to get the best use results based on the lifting platform's installation environment and usage requirements.

The lifting platform's safety switches, such as the fence door limit, cage door limit, top door limit, limit switch, higher and lower limit switch, counterweight anti-break rope protection switch, etc., are built following safety regulations. Certain limit switches are manually canceled and short-circuited at building sites or need to be repaired after being broken. This is the equivalent of canceling the safety defense lines of these lift roads and causing concealed accidents.

An essential component of the construction lifting platform, the anti-falling safety mechanism must be used to prevent cage-falling accidents and guarantee the safety of the inhabitants. Because of this, the anti-fall safety device's factory test is quite demanding. The legal inspection unit will measure the torque, the crucial speed, and the spring compression before the product leaves the factory. Each unit is installed on the construction lifting platform and has a test report. Do a drop test under the rated load after landing. A drop test must be performed every three months on the lifting platform being used on the building site.
After two years (the date of delivery on the anti-falling safety device) of delivery, hydraulic lifts with anti-falling safety devices must also be sent to a legal inspection unit for inspection and testing. After that, they will be examined once a year.

Himorlift's cargo elevator comprises a hydraulic cargo lift system and additional supporting parts such as a steel platform, frame, chains and ropes. Depending on the site conditions, people can use a DIY cargo lift as a low-cost goods elevator solution for lifting cargo, commodities, pallets, or cars. Himor creates lead rail type and scissor lift table type indoor and outdoor fixed goods lift for homes, warehouses, plants, mezzanines, etc. Clients can access 2D or 3D lift drawings to confirm the finished goods lift design.
Heavy-duty hydraulic freight lift elevators with steel frames and hydraulic systems are available for mezzanines and floors. It has many applications for lifting pallets or moving goods in commercial and residential lift platforms. For homes, warehouses, plants, mezzanines, and other structures, Himor designs indoor and outdoor fixed warehouse hydraulic freight lift elevators. Clients can access 2D or 3D lift drawings to confirm the finalized mezzanine lift design.

Why choose Himor?

The Himor Factory was constructed in Jiyang County, Jinan City, Shandong Province, China, in 2002. Our primary focus has been the design and production of hydraulic lifts since we opened the factory. At first, the Himor company produced solely hydraulic goods lifts and scissor lift tables, and its clients were all domestic.
After six years of development, Himor grew to be a larger company and began to increase output. Initially, we constructed a new workshop to manufacture lifts, and we established an engineering team to design more lifts, such as mobile scissor lifts and vertical platform lifts. We bought automatic production equipment, including bending machines and digital CNC cutters.

Customers domestically and abroad are becoming more familiar with Himor lifts. As a result, we began handling the surface of the lifts using a shot blasting machine and a spray plastic machine. For the manufacture of hydraulic lifts, this is a significant step. In light of this, we offer a two-year warranty on our scissor lift tables and goods lifts. Consumers' faith in us gives us additional assurance.

Himor acknowledged five significant products as featured products up till this year. They include freight lifts, cargo lifts, scissor lift tables, vertical platform lifts, portable scissor lifts, and one-person lifts. Also, we can manufacture other hydraulic devices, including hydraulic boom lifts and loading ramps. On customer request, we can also customize additional items in the meantime. Himor has three production workshops for hydraulic lift platforms, two design teams, three sales teams, and an after-sales department.

Himor Lift is now anticipating working with agents everywhere. Please contact the Himor lift team if you can sell hydraulic lifts locally. We want to give customers after-sales support and technical knowledge.