Are you managing a commercial or industrial property that has a standing seam metal roof system? Metal roof systems are one of the most significant portions of the overall roofing systems.
If you have a metal roof system you most likely have had the experience of dealing with metal roof leaks. The details that make up a metal roof are unique to these systems. And as a result the options of the Metal Roof Repair in Ann Arbor are different as well.

You are not alone. Metal roof systems are seen developing leaks in certain areas.
You must have heard the old saying , the devil is in the details. The saying fits truer than in the process of installation and maintenance of metal roof assemblies.
Some common metal roof issues:
1. Open seams
2. Open penetration flashings
3. Metal roof oxidation
4. Fastener backout
5. Open ridge/headwall flashing
6. Loose counterflashing
7. Improper installation methods
8. Panel damage

Structural vs. Architectural Metal Roof Systems:
Metal roof systems installation can be done as an architectural metal roof assembly or as a structural metal roof assembly. The use of a structural roof deck is the primary difference between the two.

Mostly the problems that cause metal roof leaks are because of the details used to finish the metal roof system. These mistakes are not immediately noticeable after the installation. They may take time to develop. Call a professional Metal Roof Repair contractor in MI to repair your roof.

Horizontal seams sometimes separate over time. In hydrostatic metal roof systems, this develops an opening for water to enter back into the building. In different weather metal roof systems are prone to expansion and contraction. These movements are the causes of stress at points of attachment as well as at the penetrations through the roof system. The stress causes the breakdown of the flashings at the penetrations and this results in roof leaks.

Visit: https://www.incorerestorationgroup.com/metal-roof-repair-ann-arbor-mi/