How To Properly Clean Fiber Optic Splice Closure


Posted January 19, 2019 by greentelftthgane

How To Properly Clean Fiber Optic Splice Closure How To Properly Clean Fiber Optic Splice Closure How To Properly Clean Fiber Optic Splice Closure How To Properly Clean Fiber Optic Splice Closure

 
How To Properly Clean Fiber Optic Splice Closure
The Greentelftth Fiber Optic Splice Closure is the end of the cable end and is made of fiber optic bundles and carries digital signals. Other fiber optic box standards apply to the networking world where fiber optic cables provide extremely high bandwidth connections.

Fiber optic boxes are often very sensitive and therefore prone to damage and contamination. In order to keep the equipment working for a long time, it should be cleaned regularly.

The ferrule is cylindrical and is the most critical component in the fiber optic cabinet. It is usually made of stainless steel or zirconia. Zirconia is a white ceramic and is a very refractory material. It provides chemical and corrosion inertness to temperatures well above the melting point of alumina. Zirconia is the material of choice for high quality fiber ferrules. The ferrule has a small hole in the center that holds the fiber in place. The fiber is then scribed and precisely polished to be flush with the end face of the ferrule. The two fiber cassettes can then be mated to each other by a mating sleeve. When mated, the end faces of the two ferrules perfectly contact each other to transfer light from one fiber to the other.

After a period of use, the ferrules will become dirty due to the clogging and pulling out of dust, stains and debris. These contaminants block the light path, which severely reduces the optical power and may invalidate the network connection.

To clean the box, you can use a cleaning card. This is a card that is usually sold in many stores that process fiber optic cable products. Once you get the card, you should peel off the plastic cover, hold the box between the thumb and index finger, and then press firmly to swipe the box on the card with an “N” motion.

In addition to cleaning the box with a cleaning card, you can also use a lint-free cloth. To provide the required thickness, you should fold the wipe into a square of approximately 4-8 layers. Care should be taken when folding the wipe to ensure that it does not contaminate the clean area of ​​the wipe.

The information about Fiber Optic Splice Closure : https://www.greentelftth.com/basic-information-about-fiber-patch-panel.html
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By greentelftthgane
Country China
Categories Advertising
Last Updated January 19, 2019