Moisture in a building is a huge problem. It not only affects the building but also the people living in the building. When moisture in a building is not controlled and it spreads throughout the building through walls, it can affect the air quality of the building. Moisture, when left uncontrolled, can leave the building’s walls and other furniture to be moldy. When mold and mildew are spread throughout the building, you need to know that there are some serious insulation pipe and duct work insulation requirements. You must then get it all checked. Galaxy has some really amazing insulation products. Sometimes, these are internal insulation problems while sometimes it can be external insulation problems like rainwater, etc.

What does moisture do?

Mold is a fungus. It is naturally a part of the outdoor environment. Mold can prove to be problematic when it enters the building as it slowly starts affecting the air quality. Residents in a building can face breathing problems when moisture in a building is not controlled.

Mold can reproduce and spread very quickly. The health effects of living around mold can be really hazardous. People can often have allergic reactions, throat infections, respiratory illness, etc.

Addressing and preventing moisture issues is an important thing for the health and safety of the individuals residing in a building. The major causes of moisture can be:

Leakage of moist air
Water vapor through walls, floors, etc.
Construction moisture
Indoor moisture
Burst water pipes
Rainwater leaks

A leaky pipe in the interior walls or ceilings can also cause mold. High humidity is another cause, but it is secondary. For such a situation, you need vapor-permeable insulation with great drying potential. Ductwork insulation and pipework insulation are required here in such cases. In the case of HVAC duct or pipe leaks, you require HVAC duct insulation.

Moisture resistant insulation properties

1. Any material with good moisture resistance or hydrophobic qualities. It must reduce the potential of moisture absorption. It can help you stop conducive mold growth.

2. In a warm climate, vapor usually moves from the outer environment to the inner environment. This is also a huge cause for moisture problems in a building.

3. A material with great drying potential is required. The insulation material must be quick to dry out and retain its original R-value.

4. The dimensional stability of the material must be good. Stone wool is one of the best examples. It can help in preventing voids and gaps in the walls.

The best solutions

1. Make sure to use materials that will never trap any moisture. There is something called a smart membrane in insulation material. This membrane allows vapor to flow in the right direction. Stone wool insulation is probably one of the best insulations to be used. Kingspan pipe insulation and Rockwool pipe insulation are also perfect choices for avoiding or fixing any pipe leakages. They will also allow vapor to flow easily. When vapur is not collected, there is no way that the moisture will be trapped.

2. Another good solution is to change the air barrier location. The air barrier must be brought closer to the warmer side of the insulation. This can help in reducing air and vapor flow, especially during winters.

3. Allow paths for moisture migration. Using external pipe insulation or exterior pipe insulation can allow a path for the moisture to flow easily. HVAC insulation must also be designed in pretty much the same manner.

Conclusion

There is a large variety of insulation options that are available. You can choose the options based on the kind of building you are living in, the particular moisture issues that you are facing, etc. Even though most of the insulation materials have the same basic benefits. There might be a few benefits that might differ depending on the kind of insulation material that you are using. There are also residential and commercial insulation options, specifically designed to suit your residential and commercial needs. Galaxy insulation can help you with that. Check what the building codes and standards have to say about the insulation materials. The architects must have used some or the other form of insulation in the building. But it is better to check if the older insulation has stopped functioning and if you require newer insulation material or systems in place. Visit: https://www.galaxyinsulation.co.uk/products/kingspan-kooltherm-k118-insulated-plasterboard/