Solid rivets are generally made of aluminum, copper, iron, and other raw materials, and the surface treatment is white zinc plating. A rigid connection implemented by the use of rivets on the connection piece cannot be disassembled. Small rivets can be cold riveted, and large rivets are hot riveted in the red hot state. Solid rivets can be widely used in knives, stationery account books, locks, helmets, automobile hardware bags, baby carriages, automobile clutch steel plates, motorcycle accessories, and household appliances.

Hollow rivets: need to be riveted with a riveting machine (equipment), and the backside is turned over after riveting, which fits the plane. The hollow rivet is composed of a hollow rivet body and a rivet mandrel. The hollow rivet body is composed of a shaft and a flange at one end of the shaft. The head formed on one end of the mandrel is inserted into the rivet on the opposite side of the flange of the rivet body The position of the end of the shaft of the main body causes the shaft of the mandrel to crack from the cracked end of the small diameter to perform strong stretching, which causes the shaft of the rivet body to expand and deform, and the deformed shaft and flange are opposed to the panel. The device component performs the device. Hollow rivets are light in weight and weak in nail heads. They are used for riveting non-metallic materials with a low load.

Hollow rivets are mostly hollowed from the base of semi-hollow rivets to the head. Because of their lightweight and weak nailhead, they are used for riveting non-metallic materials with low load. Hollow rivets are generally used in clothing, footwear, and other industries. Solid rivets need to be riveted again. They are often used in combination with heavy workpieces. They are often non-detachable. Semi-hollow rivets are the most widely used. Wire rod production can penetrate steel plates within 0.5mm thickness without pre-holes, rivets cannot be twisted and deformed, and are widely used on password boxes, suitcases, and military bags. Hollow nails (semi-hollow rivets) are made of soft wires. Riveting is generally required. After opening, it cannot be cracked. There are many types. Nowadays, semi-hollow nails or composite nails have been used to replace the axles on some toys on a large scale, which can greatly reduce the production cost. Blind rivets and core rivets are mostly used for the riveting of relatively thin and soft materials. Generally, the requirements are not strict, and the materials used for production are generally produced with materials with better plasticity. Semi-tubular rivets are mainly used for riveting occasions where the load is not large.

If you want to know more, please visit https://www.hollowrivet.com/