In the process of bearing device the secondary reason is: the emergence
of scars that FAG bearings are equipment, assembly, outer ring and
inner ring skew; Or it is in the process of the device and assembly of
emerging from the front load, eventually forming bearing scars that are
emerging.
Stop was device FAG 6203 bearings http://www.fagbearings-hk.com/product/FAG-6203-bearings-1702.html do you want to work in accordance with the
specification, to do not form many achievements, such as device or
method not when, in the form of FAG bearings will form the raceway
surface and bone surface formation bearing linear scars that are
emerging. Deep groove ball bearing device for indirect reaction with
the precision of the bearing when using, stature and functions.
Although the bearing quality and so on various aspects are good, but
the NSK 6205 bearings http://www.nskbearings-hk.com/product/NSK-6205-bearings-2195.html is precision components, its use should be measured
accordingly. No matter how high performance bearing use, if use
undeserved, will not get the desired performance. About the matters
needing attention of FAG bearings use the following article:
(1) keep the bearing and the surrounding clean.
Even the eyes can't see the little dust, also can bring bad influence
to FAG bearing. So, keep the surrounding clean, dust from invading
bearing.
(2) used carefully.
In use for bearing strong impact, will produce scar and creasing,
become the cause of the accident. Severe cases, can crack, fracture, so
must pay attention to.
(3) using the appropriate operating tools.
Avoid to existing tools to replace, must use the appropriate tools.
(4) to pay attention to the corrosion of the TIMKEN A4138 bearings http://www.timkenbearings-hk.com/product/TIMKEN-A4138-bearings-49554.html .
FAG bearings operating, hand sweat will become the cause of rust. Pay
attention to the operation with clean hands, it is better to try to
bring gloves.
FAG bearings in general, to control the noise of the impact, it must
take countermeasures in view of the source of the noise, and to receive
the cure effect. The main way is:
Choose low noise cylindrical roller bearings (1);
(2) to avoid resonance with the host, sensitive to avoid the resonance
speed;
(3) from the cylindrical roller bearing application link to try to
eliminate noise;
(4) in the other method is invalid, sound insulation and noise
elimination of additional measures.
FAG bearings when temperature increases, the first determine whether
false action, such as really rise, should do the following:
Check the cooling water pressure, water flow and pipeline system is
normal. If water is likely to be lower filter blockage, cannot be
handled in a timely manner, to stop treatment, when confirm can work,
then put into use.
Should be to check if the governor oil pressure, oil pressure is low
can lead to cooling water hydraulic valve closed.
Check whether FAG bearings have different sounds, and detection of
cylindrical roller bearing place whether there is abnormal.
Take oil whether there is a change of color, sample observation and
test to see whether metamorphism. If confirm the degradation new oil
should be replaced downtime.
Check the oil standard oil level is normal, if abnormal, check that the
sump oil discharge valve is shut. If the matter, should fill oil, if is
the sealant mat permeability oil, should stop processing.