1) Unbox the Printer:
Remove all the packaging materials and tape from the printer.
Take out the power cord, ink cartridges, and any other included accessories.
2) Prepare the Printer:
Place the printer on a flat and stable surface near your computer.
Connect one end of the power cord to the rear of the printer and the other end to a power outlet.
Power on the printer using the power button located on the front panel.
3) Install Ink Cartridges:
Open the ink cartridge access door located on the front or top of the printer.
Wait for the ink cartridge carriage to move to the center of the printer.
Take out the new ink cartridges from their packaging.
Remove the protective tape from the cartridges, being careful not to touch the copper-colored contacts or ink nozzles.
Insert the cartridges into their corresponding slots. The color cartridge usually goes into the left slot, and the black cartridge into the right slot.
Push the cartridges gently until they click into place.
Close the ink cartridge access door.
4) Load Paper:
Slide out the paper input tray located at the bottom/front of the printer.
Adjust the paper width guides to fit the size of the paper you are using.
Place a stack of paper into the input tray, making sure it is aligned properly.
Push the input tray back into the printer until it clicks into place.
5) Connect to Computer:
Ensure that your computer is turned on and connected to the internet. Use the USB cable provided with the printer to connect it to your computer. Plug one end into the USB port on the back of the printer, and the other end into an available USB port on your computer If you prefer to set up the printer wirelessly, refer to the wireless setup instructions provided by HP or consult the printer's manual.
6) Install Printer Software:
Visit the official HP support website (www.hp.com) using a web browser on your computer.
Search for the HP Desk Jet 2652 printer model and navigate to the support page.
Locate the "Drivers" or "Software" section and download the latest printer software and drivers compatible with your computer's operating system.
Once the download is complete, run the installation file and follow the on-screen prompts to install the printer software.
7) Complete the Setup:
During the installation process, you may be prompted to choose between a USB or wireless connection. Select the appropriate option based on your preferred connection method.
Follow the instructions provided by the installation wizard to complete the setup process.
If prompted, select the recommended settings for printing, such as paper size and print quality.
8) Test and Print:
After the installation is complete, the printer should be ready to use.
Print a test page to ensure that the printer is functioning correctly.
Open a document or image on your computer and select "Print." Choose the HP Desk Jet 2652 as the designated printer and adjust any print settings as needed.
Click "Print" to start the printing process. The printer should begin printing the document or image.

Specifications of HP Desk Jet 2652?
1) Printer Type: All-in-One (Print, Copy, Scan)
2) Printing Technology: Inkjet
3) Print Resolution:
Black: Up to 1200 x 1200 rendered dpi
Color: Up to 4800 x 1200 optimized dpi color (when printing from a computer on selected HP photo papers and 1200 input dpi)
4) Print Speed:
Black (ISO): Up to 7.5 pages per minute (ppm)
Color (ISO): Up to 5.5 ppm
5) Maximum Print Area: 8.5 x 14 inches (216 x 356 mm)
6) Duplex Printing: Manual (driver support provided)
7) Scanner Type: Flatbed
8) Scan Resolution: Up to 1200 dpi
9) Copy Resolution: Up to 600 x 300 dpi (black text and graphics)
10) Maximum Number of Copies: Up to 9 copies
11) Paper Handling:
Input Capacity: Up to 60 sheets
Output Capacity: Up to 25 sheets
Media Types Supported: Plain paper, photo paper, brochure paper, envelopes, Other specialty inkjet papers
Media Sizes Supported: Letter, legal, 4 x 6 in, 5 x 7 in, 8 x 10 in, No. 10 envelopes
12 Connectivity:
USB: Hi-Speed USB 2.
Wireless: Wi-Fi 802.11b/g/n

12) Mobile Printing Capability: HP Smart app, Apple Air Print, Wi-Fi Direct Printing
Operating Systems Compatibility: Windows and mac OS
Dimensions (W x D x H): 16.73 x 21.56 x 9.79 inches (425 x 547 x 249 mm)
Weight: 7.55 lbs (3.43 kg)

How to install 123.hp.com/dj2652 on an HP Desk Jet 2652?
To install the 123.hp.com/dj2652 software on your HP Desk Jet 2652 printer, please follow these steps:
1) Ensure that your printer is set up and connected to your computer or network. Refer to the previous instructions I provided for installing the printer hardware and connecting it to your computer.
2) Open a web browser on your computer and go to the website "123.hp.com/dj2652".
3) On the website, click on the "Download" or "Install" button to start the software download process. The website may automatically detect your operating system and provide you with the appropriate software options.
4) If prompted, save the downloaded file to a location on your computer where you can easily find it, such as the desktop or downloads folder.
5) Once the download is complete, locate the downloaded file and double-click on it to run the installation process.
6) Follow the on-screen instructions provided by the installation wizard to install the software on your computer. Make sure to carefully read each prompt and select the appropriate options.
7) During the installation, you may be asked to choose between a USB or wireless connection. Select the connection method that matches your printer's setup.
8) If prompted, connect your printer to your computer using a USB cable. The installation software will detect the printer and establish the connection.
9) Once the installation is complete, the software should recognize your HP Desk Jet 2652 printer and provide you with options to customize settings, such as print quality and paper size.
10) Follow any additional on-screen instructions to complete the setup process.
How to set up an HP Desk Jet 2652

1) Unbox the Printer:
Remove all packaging materials and tape from the printer.
Take out the power cord, ink cartridges, and any other included accessories.
2) Prepare the Printer:
Place the printer on a flat and stable surface near an electrical outlet.
Connect one end of the power cord to the back of the printer and the other end to a power outlet.
Press the power button to turn on the printer.
3) Install Ink Cartridges:
Open the ink cartridge access door located on the front or top of the printer.
Wait for the ink cartridge carriage to move to the center of the printer.
Take the new ink cartridges out of their packaging.
Remove the protective tape from the cartridges, being careful not to touch the copper-colored contacts or ink nozzles.
Insert the cartridges into their corresponding slots. The color cartridge usually goes into the left slot, and the black cartridge into the right slot.
Push the cartridges gently until they click into place.
Close the ink cartridge access door.
4) Load Paper:
Slide out the paper input tray located at the bottom/front of the printer.
Adjust the paper width guides to fit the size of the paper you're using.
Insert a stack of paper into the input tray, aligning it with the guides.
Slide the paper guides snugly against the paper, but do not force it too tightly.
Push the input tray back into the printer until it clicks into place.
5) Connect to Wi-Fi:
On the printer's control panel, press the Wireless button or navigate to the network settings menu.
Select your Wi-Fi network from the available list.
Enter the password for your Wi-Fi network using the printer's control panel or on-screen keyboard.
Wait for the printer to connect to your Wi-Fi network. The wireless light on the printer should become solid.
6) Install Printer Software:
Visit the official HP support website (www.hp.com) using a web browser on your computer.
Search for the HP Desk Jet 2652 printer model and navigate to the support page.
Locate the "Drivers" or "Software" section and download the latest printer software and drivers compatible with your computer's operating system.
Once the download is complete, run the installation file and follow the on-screen prompts to install the printer software.
7) Complete the Setup:
During the installation process, you may be prompted to choose between a USB or wireless connection. Select the wireless connection option if you haven't connected the printer via USB.
Follow the instructions provided by the installation wizard to complete the setup process.
If prompted, select the recommended settings for printing, such as paper size and print quality.
8) Test and Print:
After the installation is complete, the printer should be ready to use.
Print a test page to ensure that the printer is functioning correctly.
Open a document or image on your computer and select "Print." Choose the HP Desk Jet 2652 as the designated printer and adjust any print settings as needed.
Click "Print" to start the printing process. The printer should begin printing the document or image.

Conclusion HP Desk Jet 2652
The HP Desk Jet 2652 is an all-in-one printer that offers printing, copying, and scanning capabilities. It utilizes inkjet printing technology and provides a maximum print resolution of up to 1200 x 1200 rendered dpi for black prints and 4800 x 1200 optimized dpi for color prints.
With a printing speed of up to 7.5 pages per minute for black prints and 5.5 pages per minute for color prints, the Desk Jet 2652 is suitable for home or small office use. It supports various media types such as plain paper, photo paper, brochure paper, and envelopes, with a maximum paper size of 8.5 x 14 inches (216 x 356 mm).
The printer includes a flatbed scanner with a maximum scan resolution of up to 1200 dpi, allowing you to digitize documents and images. It also offers copying functionality with a maximum copy resolution of 600 x 300 dpi for black text and graphics.

Contact Us: +1-800-673-8163
Website:-https://www.expertprintersolutions.com/