How to install and disassemble?
Do not hammer directly SKF bearing face and unstressed surface when installed, should be compact, sleeve or other installation tool (tooling) of the bearing force evenly, do not pass through the rolling power installation. If the mounting surface coated with oil, will make the installation more smoothly. Such as interference with a larger bearing should be placed within the mineral oil is heated to the installation as soon as possible after 80 ~ 90 ℃, and strictly control the oil temperature does not exceed 100 ℃, to prevent tempering effect and impact of the size of the hardness decreased recovery. When removing the difficulties, we recommend that you use the removal tool is pulled out while the inner ring carefully poured hot oil, heat may Rolling inner expansion, making it easier to fall off.
On the mounting surface and installation site requirements?
Yes it is. If there are SKF bearing iron filings, burrs, dust and other foreign matter entering the bearing will generate noise and vibration during operation, or even damage raceways and rolling elements. Therefore, before installing the bearing, you must make sure that the mounting surface and the installation environment clean

http://www.bearing-china.cc/
http://skfbearing-china.com/index.html
Tel:00852-55143810
E-mail：[email protected]

SKF bearings,FAG bearings,INA bearings,TIMKEN bearings,NSK bearings
NTN bearings,IKO bearings,NACHI bearings,KOYO bearings