FAG bearings running performance test procedure is relatively simple, less restrictive conditions. Bearing conventional detection method is: the inner bearing sleeve is fixed, after the rotation bearing, rotating condition of the bearing can be observed. Judged good or bad performance should secure the following conditions: bearing rotation length of time (the longer the better); and whether there is blocking situation during the rotation (the smaller the better); rotating noise, the smaller the better, if there shrill sound can be judged Bearing performance deficiencies exist; then there is the bearing of stop, slow stop bearing performance is good, otherwise poor performance. The above conventional bearing detection, for some special equipment for bearings, detection method should also be changed.
When the one-way bearing FAG detection, in the case of the above points of concern, particular attention should be bearing operation is stopped whirling force. Roundabout way bearing strength smaller the better, because the one-way bearing is mainly running in one direction, if the intensity is too large roundabout bearing structural damage is very serious, there may even be bearing stuck phenomenon.
Spherical plain bearings performance test also special, because bearing joints in both directions to do the operation, and bobbing-plane rotation. Its performance is good or bad, the key performance bobbing, swing more easily process more fluent as possible, if there is the phenomenon of gnawing teeth, poor bearing performance can be determined.
A plurality of paired bearing performance testing, the key lies in the operation of a consistent performance, consistency, degree of deviation as small as possible. Consistency Consistency is reflected in two aspects, bearings stopped consistency and bearing center after the operation is stopped.
Grinding machine parts bearing the name suggests is friction and cutting, is working to enhance the accuracy of the workpiece program. FAG bearing grinding machinery in the production process of most applications, take bearings factory finished speaking, grinding machines work 60% -17% of the total workload, and with the larger size bearings nsk grinding work more complicated and time-consuming. If the rolling element bearing manufacturer, the holder is also the field of processing and production, and that the grinding machinery of the workload will reach about 80% of the total workload.
FAG bearing grinding mainly to enhance the precision bearings, including chamfer grinding, roller grinding, grinding cage. These three work steps, any deviation, precision bearings with after the turn will be affected. Bearing mention fine grinding process in place, turn the rear bearing structure with a high degree of compactness, smooth operation. If the bearing grinding deviations can be detected by running noise, shaking degree.
Bearing grinding machining process is very complex, mainly for processing online testing difficult; processing forming mechanism is more complex, many factors affect the machining accuracy; performance indicators required more and more accurate. These strict processing requirements, we can understand the importance of the grinding machine. While bearing grinding machinery remains constant development to meet the needs of bearing machining.

http://www.skfbearing-china.com/

Tel:00852-55143810
E-mail：[email protected]

SKF bearings,FAG bearings,INA bearings,TIMKEN bearings,NSK bearings
NTN bearings,IKO bearings,NACHI bearings,KOYO bearings