FAG bearings has higher precision, so compared with other mechanical parts, should pay attention to some details in FAG bearings use:


1. Keep the FAG bearings and its surrounding clean SKF Bearing Dynamic Load Rating http://www.track-roller-bearing.com/ .


2. Avoid by all means is strongly impact the FAG bearing, can cause a scar, indentation, FAG bearing fracture damage, etc.


3. Use standard tools


4. Gloves should be worn, avoid to use in damp places.


5. The user should be familiar with the relevant requirements of FAG bearing specifications


6. Develop FAG bearings using the code of conduct


(1) FAG bearing safekeeping


(2) bearing and its surrounding clean


(3) the size of the installation site and processing quality inspection


(4) the installation work


(5) after installation check


(6) remove the homework


(7) regular inspection and maintenance work


(8) bearing grease


Note above FAG bearing rust details, although cannot avoid FAG bearing rust, but can slow its corresponding antirust time, and extend the life of the FAG bearings.



The storage room temperature changed little and the relative humidity is not more than 60%, TIMKEN bearing can be stored in the original packaging or several years. For some sealed bearing or bearing with dust cover, after long-term storage, fill in the TIMKEN bearing lubrication properties of lubricating oil may reduce. The following is the TIMKEN bearing deposit need to pay attention to skills.


1, is not stored in the original packaging bearing should be properly kept, prevent from corrosion and pollution.


2, as far as possible when stored flat, the side of the inner and outer circle best all supported. If the position, due to the inner and outer circle and heavier and rolling components inside and outside ring wall is relatively thin, may cause deformation.


3 should avoid damp, storage place.


4, packaging cartons should be placed in a certain specifications shelves to find goods and clean up the inventory


5, large bearing handling when use tools, and put the principle of forklift truck light with light place goods


6, some plastic on the packing of the goods as far as possible not to suppress. Because, after all, is plastic


7, different models corresponding oil are also different.


8, regular maintenance, often wipe some anti-rust oil and so on.


9, some imported bearing outer packing cloth cover as far as possible avoid dust.


10, precision bearings to should take put down gently.