commercial anti static vinyl tile for indoor


Posted October 23, 2018 by dingdong

Composed of PVC resin, plasticizer, stabilizer, coupling agent and conductive material, formed by the plastic particles at the interface between the antistatic conductive network, has the permanent anti-static function.

 
Product specification

Size: 600mm*600mm,900mm*900mm

Thickness: 2.0mm, 2.5mm, 3.0mm

Product introduction

Composed of PVC resin, plasticizer, stabilizer, coupling agent and conductive material, formed by the plastic particles at the interface between the antistatic conductive network, has the permanent anti-static function.

Application range

Widely used in electronics, microelectronics, telecommunications environment, network floor, clean room, computer room and other places with precision instruments and equipment action.

Quality control and assurance

1. the product has been tested before conducting electrical performance, in line with quality standards.

2. sales representatives can on-site guidance or provide technical support for construction.

3. in the purchase within one year, no defective product materials and processes, such as in accordance with the construction specifications of Hua Jing Hua Jing, installation and maintenance, can ensure the shelf-life of 10 years (man-made and self construction except).

The above warranty expressly replaces any other warranties, including but not limited to any implied warranties of commercial feasibility or special use.



Maintain

1. avoid using sharp hard objects to scratch the floor and keep the surface smooth.

2. because the static floor has impermeable, easy to clean surface dirt.

3. cleaning the floor with neutral detergent scrub, rinse with water and then dry, and then anti electrostatic wax.

4. serious dirty or black spots can be cleaned with ground cleaning machines.



Install

Static conductive floor tiles or electrostatic dissipative tiles should be installed on horizontal, smooth, and non crack foundations. Residual humidity should be below 2.5% CM DUMB test.

Floor tiles, glue and installation area should reach at least 18 degrees of temperature within 24 hours before installation, with good quality conductive adhesive below 100000 ohm to stick the floor tiles. And to further installation details, please contact us.


http://www.huajing-floor.com
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By dingdong
Country China
Categories Environment , Health
Tags commercial anti static vinyl tile for indoor , homogeneous tiles for kitchen , white vinyl bathroom flooring
Last Updated October 23, 2018