KILEWS self-researched and developed automatic industrial brushless low torque, medium torque and power torque screwdriver series for torque range from 0.008 Nm to 50 Nm. Focus on the convenience for the users and increase the power saving, also design for energy conservation and environmental protection also. Torque display unit and counter type controllers SKP-BC32/40HL also available with these series of electric screwdriver, KL-CTDS and KL-MCTD are torque display unit, these KL-CTDS/MC-TDS5 are able to display tightening torque, output tightening torque, and output tightening status, double hit detection, external start, also integrate with PLC & Conveyor for Interlocking. KILEWS electric screwdriver is appropriate for assembling not only large-scale work pieces in semi-automatic or full automatic production line. Kilews electric screwdrivers are getting increasingly popular on production line operations thanks to their ability to extend accuracy, production and tractability while simultaneously lowering cost and risk of operator injuries. Screw counting function and double hit detection and external start are optionally possible with soft start module.
An Electric Screwdriver is getting precipitously well known with successional construction system directors/ drivers because of their better fineness, effectiveness, and manageability while at the same time bringing down the expenditure and hazard. Likewise, it diminishes the imminences of getting harmed. Hence, it's imperative to have an electric screwdriver in your tool compartment. An electric screwdriver is veritably not the same as a regular handmade screwdriver. Although the two instruments fill a solitary need of fixing or slackening screws. The basic distinction is the force source driving the power – manual screwdrivers work on the power applied by the specialist, and electric screwdrivers get energy from the electrical source it's joined to.
India is on the top all over the world in terms of electric screwdriver, the main advantages of using electric screwdriver is that it is having high speed models also in terms of comparison the speed of the pneumatic screwdriver is two times higher, the process like error detection cross thread, double hit, etc. is possible on electric screwdriver, mainly screwdriver is defined as the sequential construction because their high carbon steel clutch which helps for used in super durable life. When we are talking about brushless electric screwdriver, it is of three added value which helps in occurring accuracy i.e. Screw counter, Automation equipment and special application. Counter plays important role in the screwdriver, it displays on the power controller or on screwdriver, it can be integrated with PLC (Programmable Logic Circuit) with input/output of counter which gives the accurate results in the process.


External Forward and Reverse
KILEWS electric screwdriver accompany smart controller (KL-CTDS/KL-MCTDS5 & SKP-BC-32/40HLN), these smart controllers are use for screw counting, torque display, Integration to PLC through I/O’s and also these are in a position to setting running speed & amp; timing by Slow-Start function. Displaying the amount of unfinished screw counts, user can add external sensor switch to stop operation error. External forward and reverse operation perform in semi automatic and full automatic machine, so for this KILEWS smart controller have I/o’s for external forward rotation and reverse rotation of electric screwdriver thorough PLC or any electric switch.
I/O signal in smart controller which use for external forward and reverse of screwdriver –
 External Start input function.
When short Start input point and COM point (CLOSE circle), able to start the screwdriver in forward direction. When open circle with COM screwdriver stop.
 External Reverse function.
Shorten with COM (Close circle) and when enable start signal, screwdriver will start with Reverse rotation. If the Driver switches F/R switch on forward, then reverse input point and COM short screwdriver is still work in reverse rotation after start.
In KILEWS Electric screwdriver integration with assembling line can be done with the help of I/O port, now if all tightening is done OK, tool provide ok all signal to line. If tightening is not proper or any NG is found like double tightening, cross threat etc. screwdriver provides NG signal and line will be stop.