In the oil and gas lubrication system, the oil pipe means the pipeline between the oil pump and the oil and gas mixer, and the inner diameter of the pipe can be set according to the fluid motion. The air source is a pipe between the gas source and the oil and gas mixer. The diameter of the pipe is 2 times of the diameter of the oil pipe. The form of the lubricating oil enters the bearing depends on the type of the bearing and the design performance of the bearing components.
Single row bearing lubrication oil lubrication oil from the edge into the bearing, the nozzle hole and bearing inner ring in the same height, must not be directly opposite the ball bearing isolation ring. It can also be used to feed the lubricating oil and gas into the bearing, which should be ensured that the lubricating oil is not directly between the ball and the outer ring.
Oil and gas lubrication system in each of the lubricating oil to the oil point of 15mL/min, the volume of 19L/min, the system can not only ensure the lubrication, but also to reduce the effect of oil consumption. Oil and gas lubricating oil used in a one-time use, not recycling. Can accurately control the amount of oil and gas oil, and the amount of oil and gas can be adjusted to ensure that the lubrication point is in the best lubrication state.
In addition, the compressed air is small, high flow rate, easy to take away the heat, and the compressed air has a certain pressure, in the bearing cavity can play a sealing role. Oil and gas lubrication for a long time to the lubrication point to the new oil (about 5min will be consumed), to ensure that the work of the lubricating oil is not aging, not burned.
http://www.skfbearing-china.com/
E-mail：[email protected]
SKF BEARINGS FAG BEARINGS INA BEARINGS TIMKEN BEARINGS NSK BEARINGS NTN BEARINGS KOYO BEARINGS NACHI BEARINGS.