How to Choose Horizontal Stellite Alloy Band Saw Blade


Posted November 22, 2018 by cobaltalloynet

The professional Cobalt Alloy Manufacturer - cobaltalloy.net has good resistance to thermal corrosion, cobaltalloy offer Stellite 6, Cobalt Chromium Alloy, Cobalt Chrome Alloy mechanical parts offered at an unbeaten price.

 
The plate after sawing by the Stellite Alloy band saw blade has a smooth and flat surface, and some of it can be used without planing. The applicable woods are mahogany, black walnut, Anglia, Sapele, golden silk pomelo, rosewood and so on. The main features of the stellite alloy band saw blade are as follows.
1. Welding and tempering time of alloy teeth is controllable and welding quality is good.


2. Can saw hardwood, such as sand, hardwood and so on.

3. The material has high precision and the surface of the board is smooth.

4. The sawing road is narrow and controllable, which can increase the wood yield.

The high-performance horizontal stellite alloy band saw blade not only cuts sharper and wears, but also cuts out the product with small gap, smooth, tidy, high effect and saves cost for machinery enterprises. So, how do you buy a horizontal stellite alloy band saw blade?

1. Quality

The horizontal Stellite Alloy 3 band saw blade is a steel strip for electron beam welding of two kinds of metals. It is a combination of rigid and soft, and is welded into a ring saw blade in the later stage. The tooth material is made of M42 special tool steel, and the back material is imported high performance. Spring steel, the cutting performance after quenching is greatly improved, almost invincible.

2. Model

The quality of the horizontal Stellite Alloy 12 band saw blade processing, the life of the saw blade and the choice of the model are very important. If only the plate with a width of 250mm or less is processed, please select the 250 type machine, and do not select the model above 250.

Because the closer the saw clip is to the wood, the higher the quality of the wood processing, the longer it can be, the longer it can be used, and the faster it is. If the distance between the two saw clips is wider, the kerf is more distorted during the wood processing process, resulting in a higher probability of running the bend, and the twisted running bend increases the load on the saw blade, causing the saw blade to break.

https://www.cobaltalloy.net/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By cobaltalloy
Phone 66836990
Business Address NO.35, xingnong Road,Shenbei District
Shenyang,China
Country China
Categories Blogging , Business
Tags cobaltalloy , stellite alloy , stellite alloy 12 , stellite alloy 3
Last Updated November 22, 2018