When people are designing a commercial building more and more architects opt for low-sloped roofs. Low-sloped roofs cost you less and reduce the total volume of conditioned air in the building. It is convenient to provide an out-of-the-way location for heating, cooling, and fire suppression equipment.

When you are specifying a roofing material for low-sloped roofs this means built-up roofing (BUR) and using asphalt or coal tar. Recently you can see many variations on single-ply roofing membranes in York dominating the market. There are many options, styles, and technologies available these days. It is more important for architects to understand the differences between single-ply roof membrane systems.

Before you dive into the world of modern single-ply low-slope roofing options, you should have a historical perspective on traditional materials and systems. The last 15 years have shown a significant trend away in the built-up roofing and similar systems and the industry is moving rapidly towards single-ply materials.

BUR can pass the test of time, and still have the same ardent followers today. For the installation of the BUR, you need to embed roofing felts in modified hot asphalt. This process needs to be done multiple times. If you want an updated twist on the BUR you should use a granular cap sheet or field-applied reflective coatings that provide additional thermal and UV protection. Multiple layers are involved in installing BUR systems. This is a robust and durable choice.

As there are multiple installation options, single ply roofing in PA can be installed year-round regardless of ambient air temperatures which is a handy option when you decide to construct in cooler months. These rolls get reinforcement generally with polyester or fiberglass and this helps to make the material durable and also allows customizations that can satisfy specific design needs.

For more information- https://www.berkscommercialroofing.com/single-ply-roofing-york-pa/