Telfon stud bolts are bolts made of Teflon material. They have good high and low temperature resistance and can be used for a long time at -250～200℃; they have good wear resistance, excellent self-lubricating performance, excellent electrical insulation, and are not affected Influenced by environment, humidity, temperature and frequency, it has good arc resistance, excellent chemical resistance, good airtightness, radiation resistance, low temperature flexibility, and strong adhesion to metal and glass.
Performance characteristics: 1. Green and environmentally friendly, harmless to the human body. 2. Strong adhesion, good toughness, suitable for the coating of stainless steel, aluminum, iron phosphide, ceramics and bamboo carbon materials. 3. Excellent high temperature resistance, stable gloss and color under long-term high temperature use. 4. Excellent scratch resistance and corrosion resistance, high hardness and good wear resistance. 5. Excellent continuous non-stick ability, long-term resistance to boiling water, salt water, milk, eggs, butter and other edible materials.Teflon coating is a surface treatment that can be recoated. If the effect disappears during use, the characteristics can be restored by peeling it off and applying it again.
Telfon stud bolts production process: usually, the substrate is degreasing, roughening, primer coating, drying, etc., and then spraying and baking are carried out using a spray gun or an electrostatic powder spraying machine. Therefore, it is impossible to coat the device as it is with heat-sensitive devices or accessories. The accuracy after spraying cannot be achieved because of spraying. Teflon coating can be used for general metals, but if the material is thin, it may be deformed. When the thickness of aluminum, copper or stainless steel reaches about 0.5 mm, it may also be deformed.https://www.ydfastener.com/product/telfon-stud-bolts/