Such components can be installed on certain industrial injection molding machine; injection blow molding and complete sets of equipment, with a plastic mixing machine, hydraulics, controls, and other supporting components. These devices can be further divided into: as with vertical reciprocating screw machine mastication, and masticated with horizontal reciprocating screw machine. Much simpler than the vertical reciprocating in equal filling speed and low injection pressure (if necessary) the injection amount is the same, it means less energy consumption, small footprint, easy maintenance. Reciprocating screw machine mastication mainly for injection molding developed; although it is better reliability than the vertical structure of the complex, but the operation.

Current molding machinery, including large-scale production of standard equipment, can be produced at higher production rates to a larger bottle; complete injection device makes polyvinyl chloride and acrylonitrile-containing resin easier to process; increased section (bits ) development work is continuing. Typically, the pharmaceutical industry and the cosmetic industry is central 16 Division and smaller injection blow molded plastic bottle market. Specifically for this process to develop new materials has made the injection blow molding factory to enter other markets. Polypropylene copolymer easily processed, transparency, and rapid prototyping, it has actually replaced the loading cough and cold medicine mouthwash bottles.

There are other new resin injection blow molding grade polycarbonate and polyvinyl chloride homopolymer. These crystalline transparent materials have been relatively easily in the vertical screw machine processing, are fitted with continuous horizontal plunger screw screw machine was working. The new streamlined manifolds coupled with improved acrylonitrile-containing resin and polyvinyl chloride resin has made a multi-chamber operation become a reality, even though these resins are heat-sensitive. A chamber 8 a mold has been successfully used in PVC processing, a number of chamber 12 a mold has been used in bottles containing acrylonitrile resin production. Several companies are to use existing 8-cavity mold production of PVC bottles, it is the result of 01 materials modified to reduce its heat-sensitive. Is now evident, the use of larger machines, high clamping pressure and a larger area of ??the platens can be economically produce plastic bottles 4 l or less. Accurate bottlenecks and advantages of such waste will not be able to gradually compensate for the higher cost of tooling. Since the development of the machine (to increase the number of segments) and mold design innovations, future work will focus on the development orientation of the resin is improved. Progressive die design technology has been able to manufacture plastic bottles partial neck, square neck plastic bottles, can bring on the bottom groove precision, and reduce the entire thickness of the bottle wall, shorten production time. Injection blow molding mold design development will gradually molded into the household chemicals, toys, particularly food container market.

Progress of human society is closely related to the use of the material. Humanity is to survive and develop the use of the material can not be separated. With the development of modern industry, it has become a new plastic material also developed, and increasingly widespread application. It is in the national economy in many areas to varying degrees, instead of the metal.

PBM Company is a Plastic Bottle Manufacturers, Plastic Water Bottle Manufacturers,
Custom Plastic Water Bottle, HDPE Bottle Manufacturers, Plastic Bottle Cap Manufacturers
Website: www.plastic-bottle-manufacturers.com