Glass Furnace technology commonly use the source of compressed air, oxygen and nitrogen. Fused cast [b][url=http://www.yilongrefractory.com/ProductServletOne?id1=1&id=1]refractory brick[/url] [/b] 41# is generally used as bubble brick.
The entire furnace tank from melting tank, cooling tank until the molding part are all in contact with the glass liquid.
A. regenerator chamber: top crown of regenerator usually adopts fused cast AZS brick, direct bonded magnesia brick or silica brick. The top layers of side wall and partition wall use[b][url=http://www.yilongrefractory.com/AllProductServlet?id=1&number=20] refractory material [/url] [/b]magnesia brick, middle layers use magnesia brick or low porosity clay brick, and bottom layers adopt low porosity clay brick.
B. tank bottom brick: The condition of the bottom brick is that the glass liquid temperature is low and the flow is weak. The tank bottom is now using the multi-layer compound bottom structure, usually the ground tiles use 300mm clay brick, then 25mm zircon sand or fused zirconia corundum ramming material are adopted above the clay bricks, the paving bricks adopt 75mm fused cast AZS brick.
C. sidewall brick: sidewall is mainly adopted fused cast AZS brick, and recently years fused cast α-β alumina is used in sidewall.
D. neck brick: the corner of neck adopts WS fused cast AZS brick 41# which can strengthen the ability to resist erosion. The short neck crown and the neck part adopt high quality silica bricks.
E. doghouse brick: doghouse is usually serious damaged as it is influenced by the erosion of powder and glass liquid, wear of material layer, and flame. Especially the corner of doghouse, so the corner brick generally adopts fused cast AZS brick 41#. Except for the corner bricks, other parts can use PX casting fused cast AZS brick 33#.
F. channel brick: usually adopt fused cast AZS brick 33# or fused cast alumina brick α-Al2O3.
G.cooling section: the temperature of glass liquid is lower than melting section, so the erosion is relatively lower, so fused cast AZS brick 33# can be used in this part.