Steam irons are always dripping - you can do this:


Posted July 19, 2019 by markwahlbarg

Solution: Increase the temperature by setting the iron slightly warmer or to a higher level.

 
When the steam iron drips, the helper quickly becomes a dirt fin: Instead of smoothing wrinkles with steam and heat, the iron then distributes water stains and lime crumbs on the freshly laundered clothes. For the reasons for dripping steam iron and what you can do about it, read our guide offered by wholesale laundry.

Five reasons: That's why the steam iron drips

1. Ironing temperature too low

2. Calcium deposits

3. Too much water in the tank

4. Fabric remnants on the soleplate

5. Qualitatively inferior device

Glowing coals for smooth robes:

To flatten their silk clothes, the Chinese began to iron 2000 years ago - with glowing coals. The coals filled them with sand in a metal pan. The heat and the weight of the pan smoothed the fabric. It was not until much later, in 1738, that the English businessman Isaac Wilkinson patented an iron that closely resembles today's models.

But there was still no electricity, so the iron had to either be heated on the stove or filled with coal. At the beginning of the twentieth century, electric power opened the way for an electric iron. The once patented by Wilkinson model but sold until the 1940s - a true perennial so. A version of the original iron can still be seen today in the Museum of Energy History.

Ironing temperature too low:

Water vapor is generated at 100 ° C. If your steam iron is not hot enough, steam cannot be produced and the iron drips out of the appliance.

Solution: Increase the temperature by setting the iron slightly warmer or to a higher level.

Lime deposits in the steam iron:

As suggested by wholesale laundry, if limescale accumulates in the iron, the appliance cannot heat the water effectively enough. The more lime has accumulated, the harder it is for the iron to bring the water to the appropriate temperature. With strong calcification, it is possible that no more water vapor forms.

Turn on the iron and wait for it to heat up. Place it on a surface that is insensitive to heat, such as the metal shelf on the ironing board or a stainless steel sink.

After the iron is completely heated up, briefly press the steam function to dissolve the limescale in the pipes.

Repeat this process with the spray water function.

Switch off the iron and let it stand for a while to improve the effectiveness of the descaling agent.

After about 20 minutes, you can turn the iron on again.

Now operate the steam and spray water functions until the water tank is completely emptied.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By markwahlbarg
Country United States
Categories Business
Last Updated July 19, 2019