LED panel light in the living room has become a family, "pillar", but it also will be dirty that need cleaning and maintenance. Because of the different types of LED panel light shape, it will bring a lot of trouble when cleaning. Below make a brief presentation on its Maintenance and cleaning techniques.

Although it close to the LED panel light ceiling, electromagnetic response when lights will absorb some of the dust in the air. Lights will attract mosquitoes flying into the shade, so remember to keep a clean home environment, lighting, and more to clean up and prevent the lights dimmed. Usually should regularly check fixtures, light feet appear if the starter is bad or loose, etc., should be prompt re-installation and adjustment.

When installing LED panel light, the situation home to the roof should be considered. If the roof masonry structure, it will be used embedded bolts, or with expansion bolts, nylon plugs, plastic plugs, and other fixed and can not be used wedge. Usually do not hang too many ornaments in the lamp; otherwise exceeding the carrying capacity will fall to hurt.

Shades can be cleaned according to the material. If it is glass, you can use a small soft cloth carefully scrub or dip toothpaste clean. If it is crystal shade, you can use a neutral detergent. The lamp holder above the dirt clean surface dirt can be removed first, and then wipe cloth moistened with toothpaste, does not allow water to remain in the holder. Explosion-proof led exit signs https://www.eneltec-led.com/led-explosion-proof-lights/led-explosion-proof-exit-lights.html

When you scrub the LED panel light, it should use light-colored socks or cotton gloves sets in your hand, and gently wipe lamps, lamps do not move freely inside the unit. If you want to wash your own plate lights, then there must be two people with the first turning off the power, but also careful not to use a damp cloth to wipe the holder, prone to leakage. best led headlights http://bestledheadlight.com/