1, LED light-emitting efficiency of the high

Luminous efficiency comparison: incandescent, halogen light efficiency is 12-24 lm / W, fluorescent 50-70 lumens/watt sodium 90-140 lm / W, most of the power into heat loss.

LED luminous efficiency: can be sent to 50-200 lm / W, and the luminous color is a good, narrow spectrum without filter, which can be directly emit colored visible light.

2, LED light source low power consumption

Single tube 0.03-0.06 W power LED, DC drives, single -tube drive voltage of 1.5-3.5 volts. Reflect the current 15-18 mA fast in the high-frequency operation, with the same lighting effect in the case, the power consumption is one-millionth of incandescent, fluorescent tubes half Japanese estimates, such as the use fluorescent light efficiency even higher than 2 times the LED replacement of incandescent and fluorescent lamps in Japan half a year can save the equivalent of 6 billion liters of crude oil, the same effect of a fluorescent 40 watts, while the use of LED power only 8 watts each.

3, LED light long life

Incandescent, fluorescent, halogen light field is the use of electronic radiation emitting filament light easy to burn, heat deposition, the light attenuation characteristics, and the use of LED lights, small size, lightweight, epoxy resin, high strength to withstand mechanical shock and shock, not broken, the average life expectancy of 100,000 hours, LED lamp life of up to 5-10 years, can significantly lower lighting maintenance costs alone to avoid the pain of frequent lamp replacement.

4, LED light source safety and reliability

Low heat, no heat radiation, cold light source, can be safely arrived touch, can accurately control the angle of the light pattern and light, color and light, no glare, no mercury, sodium, and other potential health hazards of substances.

5, the LED light source of environmentally-friendly

LED light-emitting body for the whole solid, impact-resistant unbreakable, recyclable waste, no pollution, and reduce the amount of sulfur dioxide, nitrogen dioxide, and other harmful gases and other greenhouse gases produced to improve the living conditions of people's lives can be called " green lighting ." Explosion-proof led exit signs https://www.eneltec-led.com/led-explosion-proof-lights/led-explosion-proof-exit-lights.html

Production of high-brightness white LED light intensity 1:2:0.38 mixed in the ratio from white, two kinds, the use of ultra-high InGaN blue LED, add a little of its total drill pipe yttrium garnet phosphors as the main body, it can in the blue produce excitation yellow-green , yellow-green and this can be synthesized with a revealing blue-white, three are non- system UV LED, using UV -excited phosphor powder or other phosphors to produce a multicolor mixture of white light. best led headlights http://bestledheadlight.com/

6 Of course, energy efficiency is the most important reason we consider the use of LED light source, LED light than conventional light sources may be expensive, but with energy-saving light year payback time, thus saving a net gain of 4-9 years, several times a year closing the lid on.