The Patch Cable generally acts as a patch, which is used for making an electrical or optical kind of connection between the different kinds of devices. There are many different kinds of such cables available and this is quiet short kind of cables, which are almost a few inches to several meters. Although these are called patch wires, they perform a certain kind of specific function based on how they are actually made. There are different kinds of cables like the television cable, which is used to connect from a set-top box to television. This cable is also a kind of patch wire.

The Multimode wires are used for the light signals so that they travel down through the reflective wiring in order to reach the end of the connection. These wires are used for two or more than two strands of glass fibers. These fibers are very thick in diameter when compared to the single mode wires; the diameter is up fifty to hundred microns. Through The multimode fiber optic, the light signals can easily travel down the many paths, and they also allow for the higher bandwidth but it is not necessary that they may provide with higher speeds.

Sometimes it happens that the wiring, which is used for the cables, can be a kind of standard gauge or any other specification. The connectors on the end and the connectors how they are to be used will finally end up making one cable different from the other. The network wire can be cabled in certain ways and in many different ways to conform with the different networking standards. A short kind of Patch Cable can be also referred as the pigtail. If the different types of connectors changes between the ends then the cable is also called as a dongle or an adapter. An example for an adapter could be the audio cable, which has RCA jack on one end, as well as a phone plug on another end.

The transmission speed of the Multimode wires is quite different from the single mode wires. These wires offer very good speed ranging from the ten to hundred MBS. The transmission speeds actually depends on the length of the wire and the more the length will be the greater will be the speed. These wires can be easily used for greater speed as well as for long distance. The data can be easily transferred from one place to another and at longer distance with the help of these wires.

The fiber optic Patch Cable is very commonly used for networking. The term patch cord is sometimes used with the patch cord. The patch cords are often non-network types of the cable, which are used for the wiring stereo components. These cords are generally manufactured by using the stranded rather than the solid sheathing this reduces the risk of the breakage when the unplugging or carrying them. These cables can be easily used for connecting two kinds of network devices like linking a computer or any other such a kind of device.

You can use the different kinds of cables for linking many kinds of devices Patch Cable http://andcorp.com.au/products/fibre_optic_products/patch_cables ? You can also use the wires for multiple connections with the help of Multimode http://andcorp.com.au/products/fibre_optic_products/cable