With the right kit, you can repair minor holes and tears in all types of inflatables. We carry repair kits for vinyl tubes. If your inflatable is made of PVC, you'll need a different type of repair kit, but never fear...

Repairing inflatables is a multistep process. To repair your inflatable:

• Clean and dry the damaged area
• Apply one to two drops of repair adhesive to the hole
• Allow the adhesive to dry for 24 hours
For large holes, be sure to use a vinyl patch. To complete this type of repair, you’ll need to:
• Cut one of the vinyl patches to a size that covers the hole and beyond it by about 1/2 of an inch
• Form the patch into a round or oval shape without corners
• Smear a thin layer of repair adhesive across the surface of the patch as well as along the area that requires repair
• Before positioning the patch on the inflatable, permit the adhesive to dry for two to four minutes until it’s tacky to the touch
• Place the patch over the damaged section of the inflatable
• Beginning at the center of the patch, press down and slide your fingers out to the edges to create a seal
• Set a heavy object like a diving weight or a landscaping stone over the patched section to ensure that it dries flat
• Allow the adhesive to dry for an additional 24 hours (minimum)

Ensuring Inflatable Repair Success

When applying the repair adhesive, make sure that it coats the entire hole. If you’re repairing inflatables with the kit’s patches, add a little more adhesive to the edges of the patch after the drying process is complete to increase the strength of the seal. Also, confirm that the adhesive is completely dry and that the repair was successful before launching the inflatable back into the water.

A Few Words of Caution

The adhesive used to repair inflatables is flammable, so be sure to store it away from all heat sources. Don’t smoke while using it, and avoid making repairs near an open flame. When using the repair kit, make sure that you’re in a well-ventilated area. In addition, take precautions to avoid contact with your skin, eyes, and clothing.

Built to Last

Inflatable water and snow tubes are made from durable materials, but because the covering is malleable, it is susceptible to punctures and abrasions. Proper care is the best way to prevent repairs.

For more details on our products and services, please feel free to visit us at Water Slide Rentals, Bounce House Rentals, Party supplies, Inflatable water slides, water slides