Remember never cross parts as some carburetors will have different components that appear the same or even components that wear evenly but will only work with their original carburetor. And never disassemble more than one carburetor at one time, you must care of all parts.

Cleaning all the parts entirely with a good spray cleaner. Wear chemical resistant gloves and clean any debris found including varnish or oil. But do not use an automotive type carburetor soak, because it can damage internal parts on a carburetor. Besides, some motors have internal seals and parts that will not be disassembled or retrieved easily and the soak may dissolve those causing a malfunction. You have to take time to clean every corner and hole found to ensure all passengers are clear. Be aware no second chances are given here once you re-install it.

What is more, locate a suitable carburetor kit for replacement parts. A quick inspection of the float should be made to determine whether it needs replaced as well as most kits do not include a float assembly and must be purchased separately. Make sure the kit has parts that look virtually identical and also make sure of any parts missed during dis-assembly which require replacement. You should always purchase a new kit whenever possible during cleaning as sometimes carburetors can be disassembled just for cleaning but if any gaskets are damaged they must be replaced.

If necessary, replace parts from the kit. And take note of a few key components to any carburetor rebuild. In fact, what is called the needle and seat is a brass insert and a small pin which sometimes with a rubber tip but always pointed that sits below the float assembly. The needle is usually attached to the float assembly by a clip and moves in and out as the float moves. The needles can stick in the seats causing a lean condition or fail to close completely causing a flooding condition. Then, no matter what the problems, the needle and sear should always be replaced when possible. You need to make sure to replace all seals and gaskets and any new parts included in the kit.

Here i recommend you go to www.zjautoparts.net.

Yuyao Xinxin Plastics & Rubber Products Co., Ltd. founded in 1985, covers an area of 20,000 square meters, a construction area of 17,000 square meters, and has more than 400 employees including over 60 technicians and managers. Our company is a professional manufacturer of Motorcycle Accessories. The main products are main nozzle, carburetor needle valve, carburetor seat valve,carburetor float, piston ,EGR valve spindle, valve seat,etc.Our company boasts solid technical strength and owns the first-rate equipment, adopting scientific and strict management and having a high reputation.

In the middle 1990s, our company was certified to ISO9000 Quality Management System. In the middle 2000, our company was certified to TS16949 Quality System. In the tenet of "Quality First, Customer Satisfaction", our company adopts scientific management and strict quality supervision and provides customers with the first-rate products. Our company has more than 100 CNC lathes, over 50 automatic lathes, four CNC machining centers, and many inspection facilities such as surface roughometer, roundness tester, profile testing instrument, multi-functional tools, measuring apparatus, projector, etc.

Our products are exported to the USA, Japan, India, Taiwan, Brazil, Iran, Spain, etc. We provide high-quality products for the domestic foreign-invested enterprises and famous enterprises such as VW, Honda, Bosch, DENSO, AISIN, KEIHIN, TK, etc. We are waiting for domestic and foreign customers to visit zjautoparts.net .