Before selecting a gear motor, it's essential to know what it is, what it actually does and any mechanical and technical constraints that exist over any other motor you can use.
What is Gearmotors?
Gearmotors can be explained as an absolute system of motion force that consist of reduction gears and electric motor that are normally designed within one casing. Within this both the gears and the motor can be configured for clear-cut engineering.
In addition, motor and gear housing within equal design casing indicates that it can be simpler to decrease the component’s size over selecting a separated gear rack and motor. As such, often you will get these forms of motors within electrically powered machines and power tools that are fully dependent on weight and size restrictions. These types of motors can be downsized to power alarm clocks or upsized to power commercial lifts for the home.
The major advantage of a gear motor is that they are perfectly designed for the reduction of output speed whilst the torque is improved. Though, it is balanced in ratio.
This kind of speed reduction gearing allows small size electric motors to organize higher loads, even though it should be stated this will be slower than an optional large size electric motor.
The rears reduction is made up of small gears that consecutively drive large size gears. Normally, there are different types of gears sets to manage the torque and power outputs. These gearmotors are not only used to boost torque and power, but these are often utilized to decrease power. A perfect example is a small alarm clock. Tiny electric motors utilized within the alarm clock will need different sized gears to control the second hand, minute hand and hour hand. The gears would be tuned as per on the motor delivering the accurate level of RPM whilst thinking about any friction’s elements that have occur as of the mechanism of electric motor. The same assumption is applied in bigger applications.
How to understand the torque or force of gearmotors?
Management of torque is one more configurable advantage of using gearmotors over any other types of electric motor. Reduction of torque is needed when a large force or load is needed to be decreased. A perfect example of this will be for hospital elevates used to move immobile or heavy patients from one bed to other bed and reclining furniture where the weight or load being reclined or lifted is not always going to be equal.
Today, most of these gear motors produced for industrial functions and these are normally AC-powered. They are even permanent speed gears, though there are changeable speed gear motors that will give a higher level of power/torque and configuration control. On the other hand there are DC gearmotors that are normally used on moving applications and vehicle like breakdown recovery power winches, windscreen wipers and pulleys. These motors are ever growing in usage from makers who supply products both for manufacturing unit and within our home.

Please Visit http://www.power-tronic.com/ for more information.


Media Contact:
Powertronic Drive Systems GmbH
Berlin, Germany
Phone: +49 30 7719635
[email protected]